Deployment Solution

 View Only
  • 1.  Post Deployment Error

    Posted Mar 05, 2009 04:44 AM
    I am having an issue where I can deploy an image down to a HP Proliant server but it will not boot to the OS. There is no error, all there is the "attempting boot from hard drive (c". Any ideas on this would be great.

    Thanks,
    Rob


  • 2.  RE: Post Deployment Error

    Posted Mar 05, 2009 05:02 AM
    Was the image created specifically for this server? The reason I ask, if it was created on another system with a different mass storage device. If that is the case, Windows will not see the hard drive to be able to boot.


  • 3.  RE: Post Deployment Error

    Posted Mar 05, 2009 05:25 AM
    This is a sysprep based image...it doesn't even attempt to start Windows.


  • 4.  RE: Post Deployment Error

    Posted Mar 05, 2009 12:28 PM
    Make sure your image has the Mass storage drivers for your server. If your shop uses HP servers then I would recommend HP RDP (DS with HP support).

    cheers,

    nelo