Video Screencast Help

problem in backup exec

Created: 04 Feb 2013 | 3 comments

 

firmware types do not match
for the restore operation to continue the backup firmware type and the current firmware type must match
 

Comments 3 CommentsJump to latest comment

CraigV's picture

...so this is your error. What are you trying to do when this happens?

Alternative ways to access Backup Exec Technical Support:

https://www-secure.symantec.com/connect/blogs/alte...

pkh's picture

Are you restoring a backup of an uEFI machine to a BIOS machine or vice-versa?  This is not supported.

Sym-cr@zy's picture

Switch the system to Legacy BIOS/CMOS mode or Auto Mode and try to boot with System Recovery Disk. Please refer to your hardware documentation to check if this option is available and how to change the boot mode.

          Appreciate every help you get, to help yourself better
                                  & 
      Please mark 'SOLUTION' for the post which resolved your issue.