recover the data which is present on the encrypted hard drive if in case of Hardware failure
Created: 27 Jan 2012 | 6 comments
Hi ,
We are using SEE 8.2
How do we recover the data which is present on the encrypted hard drive if in case of Hardware failure (RAM, processor, motherboard)?
Regards
Santhosh
Discussion Filed Under:
Comments
@ please
Please help on this .................
Hi you can check this
Hi you can check this URL.
http://www.symantec.com/business/support/index?page=content&id=TECH134766
Thanks In Advance...
Ashish Sharma
If the suggestion has helped to solve your problem, please mark the post as a solution
hi Santhosh, are you check
hi Santhosh,
are you check URL.
Thanks In Advance...
Ashish Sharma
If the suggestion has helped to solve your problem, please mark the post as a solution
"Thumbs up" to the above
As per the article posted, it is recommended that you contact Symantec Technical Support for help in using the Access and Recover CDs, but they are the tools you'll need in addressing your problem.
Something else you'll have to consider is, due to the hardware problems, you'll likely have to remove the encrypted disk, and place it in another machine, preferably of the same make and model. I'd recommend you make sure this is the only disk in the working machine as well (to reduce the risk of messing with any unencrypted disks).
hi Santhosh, have you receive
hi Santhosh,
have you receive solution ?
Thanks In Advance...
Ashish Sharma
If the suggestion has helped to solve your problem, please mark the post as a solution
Thumbs up" to the
Thumbs up" to the above
posted attached URL.you may follow this process
Would you like to reply?
Login or Register to post your comment.