reinstall tape driver on 12.5, how ?
Updated: 21 May 2010 | 6 comments
This issue has been solved. See solution.
Hello all,
To which i changed the SCSI controllers, Windows thinks it gives new tapes and asks me for the driver.
This happens with each restart. How can i later install the drivers of BE 12.5, thus Windows stop asking?
thx
parcival
discussion Filed Under:
Comments
Hi Please check the below
Hi
Please check the below link for device drivers with BE 12.5
For 32 Bit Server
http://support.veritas.com/docs/329886
For 64 Bit Serevr
http://support.veritas.com/docs/329887
Note: If this post provides you with a solution don't forget to mark the discussion as solved.
This is how you would install
This is how you would install the Symantec drivers:
1. Tools --> Wizards --> Device COnfiguration Wizard
2. Next (shows you a summary of your devices, be it B2D, autoloaders, libraries etc). Click Next Again.
3. Choose the option to "Install tape device drivers", and click Next. This brings up another wizard, and you can click Next.
4. Click Next at the USB device drivers warning...
5. Make sure the first option (Use Symantec drivers for all supported tape devices" is selected, and that the Additional options has "Use Plug and Play drivers for Windows 2000 or later" selected (might not need it, but I keep it on).
6. Click Next, and let your installation run. When it detects your tape drive and asks to install the drivers, choose the option to allow. You MIGHT need to reboot your server, so be aware of that.
If you want the latest device drivers, which isn't a bad thing, use the links above to get them. Load them like a normal installation, which installs them into BE, and then do the above.
If you find this is a solution, please mark it as such.
Hi Craig, hanks, that the
Hi Craig,
hanks, that the correct hint had been :)
parcival
Cool, let me know if it works
Cool, let me know if it works and if it solved your query!
Thanks Parcival!
If you find this is a solution, please mark it as such.
Craig, Everything works now
Craig,
Everything works now without problem.
That was the solution :)
Thanks for your assistance.
parcival
Rad, no problems!
Rad, no problems!
If you find this is a solution, please mark it as such.
Would you like to reply?
Login or Register to post your comment.