Video Screencast Help
Give us your opinion and win with Symantec! Please help us by taking this survey to tell us about your experience with Symantec Connect, so that we can continue to grow and improve.  Take the survey.

Reporting client running Network Threat Protection

Created: 10 Aug 2009 • Updated: 21 May 2010 | 3 comments

Is there a report that will tell you which clients are running Network Threat Protection?
All of a sudden clients are reporting that SEP is showing that AV and Spyware protection are turned off, and Network and Proactive Threat Protection are turned on.
This is the complete oppsite of what it should be.   If I could run a report or look at a log file that shows which clients are running Network or Proactive Threat Protection then i could fix them all.
One would think that this would be one of the reporting options to choose from. 

Thank you for any help on this.

Comments 3 CommentsJump to latest comment

bjohn's picture

Not sure if there is a report, but...
in the clients tab, if you change the view, you should see firewall status. Should show if the FW is enabled or not.

PCLAB's picture

So if the FW shows it's enabled does that mean Network is installed?

jmadiwale's picture

In the SEPM under the Clients tab, for any perticular group, next to 'View', you can select 'Protection Technology', And it will have Firewall Status(Whether Installed or not installed). It was not available till version MR3.