Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

required to backup exchange 2010 (two clusters) with netbackup 7.5 STD MM server

Created: 22 Feb 2013 | 11 comments

HI,

 We want to take the backup of exchange2010(2 clusters) with the Netbackup 7.5 ( installed with standard server and client licenses).

How many licenses do we required to  configure the backup of exchange2010.

regards,

Harpreet Singh

Operating Systems:

Comments 11 CommentsJump to latest comment

Mark_Solutions's picture

Always complicated this one so lets hope i get this right!

You need one Application and Database License (tiered correctly) for each mailbox server.

You also need a client license per mailbox server and also for CAS, Edge and HUB servers.

Of course if all of it is hosted on VMWare other rules can apply - that gets even more complicated!

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

hsingh12's picture

Thanks for teh reply

But we dont have VMWare setup.

all the server are stand alone physical servers.

current configuration is as follow.

Netbackup 7.5 master/media server ( standard server licenses)@1

Netpackup 7.5 client ( standard client license)@8

the cureent setup is working properly.

The new setup will be

Exchange2010  mailbox cluster server( 2 cluster servers)

to support exchange20 there are 4 HubCase servers.

Need to create the backup solution for exchange2010 with the preinstalled netbackup 7.5 (standard licenses).

1. How many exchange licenses ( name of licenses)

2. How many server license( name of license)

3. How many client license( nane of license)

what are the others  things need to create the sucesfull backup.

Mark_Solutions's picture

Your server license sounds OK then

For the exchange components you will need:

You will need 2 x NetBackup Appliacation and Database Pack Options (Tiered)

You will need 6 x NetBackup Client Licenses (Not Tiered)

Tiering:

Tier 1 - 1 physical processor (no matter how many cores / threads)

Tier 2 - 2 or 3 physical processors

Tier 3 - 4 to 7 physical processors

Tier 4 - 8 or more physical processors

Hope this helps - double check it all with your Symantec Partner

#edit#

For a successful backup work through the NetBackup Exchange Admin guide to make sure everything is setup right - and if you want to do Granular backups you will need to back up to disk

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

hsingh12's picture

TSE suggest us to use the " enterprise client license" to take the exchange 2010 backup

Mark_Solutions's picture

That may be the case ... if you back up the 2010 infrastructure via the DAG name you have to use snapshot backups so if that is you plan the two mailbox servers would need to use Enteprise clients

I will see if i can confirm that for you

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

Mark_Solutions's picture

If you have Standard Edition NetBackup then i don't think you can use an Enterprise Clinent though .. and would need to upgrade you server license to Enterprise Sever too .. will keep digging for you ...

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

hsingh12's picture

Mark,

 what will be the best solution to baclup the exchange 2010 with Standard Edition NetBackup.

what are the licenses or any other agent application required for the same???

hsingh12's picture

what will be the solution to do the backup of exchange 2010 with STD 7.5 MM server and client.

Mark_Solutions's picture

Sorry - been tied up - i am looking into this for you to get a firm answer

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

J_MCCOLL's picture

Hsingh, you are best to read the Admin Guide to determine and then configure your backup solution. 

Every environment is different and should not be advised adhoc.  If you have a solution that you would like to implement post it here and we would happily confirm or correct it, but if you have no solution then you would be best suited to contacting your Symantec RTAM or BCAM and asking for some consultancy work.  This could easily be developed and implemented, with a configured Exchange environment in place, in a 3 day period with configuration, deployment and testing.

Reuocat tergum tuum verum dicere de quomodo prospere fuerunt...

(Restores tell the truth of how successful your backups were)

Mark_Solutions's picture

OK - here goes ...

You are OK with the Standard Edition of NetBackup

You obviously need to do you DAG backups (which require that you select the snapshot option) and you should be using VSS for the snapshots which is part of a standard client. (Any form of hardware snapshot would require an Enterprise Client and you cannot use Enterprise clients with your version of NetBackup)

So you need a standard client for each server involved (each mailbox node and CAS Server) plus two database application packs (one for each mailbox server)

The database application packs are tiered so will depend on the number of physical processors you have in the mailbox servers.

Hope this sorts it for you

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.