What is the reason that is displayed in the Details tab?

Hi Marianne,

thanks for replay. its just showing policy name in details tab.nothing going to progress after that.

That means it's not even getting to resource allocation.
Has this policy worked before? Are other policies working?
Give more detail about your config:
Master server O/S, Media server(s) details.

Are all services/daemons running on the master and media servers?

Services/daemons that should be running on a Master server: http://seer.entsupport.symantec.com/docs/297548.htm

Services/daemons that should be running on a Media server: http://seer.entsupport.symantec.com/docs/297551.htm

Hi Marianne,

Thanks for your support.yes policy working before but from last evening issue started.

Matsre serve OS:- solaris 9 (NBU 6.5.3)
Media server OS :-  solaris 9 (NBU 6.5.3)

I check all demons.its working fine. but backup not allocate resource.

Regards
Anjan

Please post output of 'bpps -x' on the master server.
Have you tried to stop and restart all processes, including PBX?

What is the output from vmoprcmd command?
Here below is example from my system - notice the ACTIVE Host status
D:\>vmoprcmd

                           HOST STATUS
Host Name                                  Version   Host Status
=========================================  =======   ===========
MMNBU                                   654000    ACTIVE

                                PENDING REQUESTS

                                    <NONE>

                                  DRIVE STATUS

Drive Name               Label   Ready  RecMID  ExtMID  Wr.Enbl.  Type
    Host                       DrivePath                            Status
=============================================================================
IBM.ULTRIUM-TD3.000      No      No                     No        hcart3
    MMNBU                                       {6,0,0,0}                            ACS

Hi
check of the OS has corrected driver for library robot,also right driver for tape drives.
then restart Netbackup services ,,, check if  vmd and oprd servers terminated
ps -ef | grep oprd, ps -ef | grep vmd
Run Configure storage Device wizard to take correct drivers.
after go to Device tab and check connectivity with devices

kind regards.

Policy name is on the Job Overview tab.  Check the Detailed Status tab for more information.

Thanks all for you support. now issue resolved.nbrb process hang that why backup not runing.i restart nbrb process and backup run smothly. thanks once again for your support.