Robotic cannot access media
Created: 18 Jul 2012 | Updated: 19 Jul 2012 | 14 comments
This issue has been solved. See solution.
Hello, i am using netbackup 7.5 on Windows Server 2008
After config Tape Library Sun StorageTek SL48 with 2 drive, my robot inventory scan media ok. But robotic cannot access media.
Here's some result from robtest:
- test_ready: Unit is ready
- s p: There are no media access port elements
- mode: First transport addr = 0, Number transport elements = 1
First storage addr = 1001, Number storage elements = 48First media access port addr = 0, Number media access port elements = 0First drive addr = 1, Number drive elements = 2Library does have a barcode readerMODE_SENSE complete
inquiry: HP MLS G3 Series F.80
init: Initiating INITIALIZE_ELEMENT_STATUSINITIALIZE_ELEMENT_STATUS complete
Any ideas about this? Does "no media access port cause the problem?
Thanks and Regards,