Video Screencast Help

Robotic library drives shows as standalone tape drives

Created: 18 Nov 2013 | 5 comments

Hello

 

We are using BE2012 and we have netapp.

 

2 different library connected to directly on netapp

1 tape library connected to switch which is directly pointing to BE2012 server.

 

The tape drive shows as stanalone for one of the library connected on netapp.

 

Please suggest after reviewing the screenshot and at this moment the library which directly pointing to BE2012 server is disconnected and then we have take the screenshot.

Operating Systems:

Comments 5 CommentsJump to latest comment

Jaydeep S's picture

For the Tape drives not showing under the RL, use the device configuration wizard. It will give you an option to drag the tape drives and place them below the relevent library.

 

WikiDonor's picture

Hey Jaydeep S

 

I am using BE2012

If you find my comment informative and helpful please mark the post as resolved.

CraigV's picture

...what does the TN have to do with the OP's question about configuring the tape library correctly in BE?

Thanks!

Alternative ways to access Backup Exec Technical Support:

https://www-secure.symantec.com/connect/blogs/alte...

WikiDonor's picture

I have seen this article but not really sure on where exactly I am missing.

 

WOuld you like to see the output of sysconfig -t or -m command.

If you find my comment informative and helpful please mark the post as resolved.