Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

Secondary RVG not showing after remote switch back to primary

Created: 24 Mar 2014 • Updated: 03 Apr 2014 | 1 comment
Jomy's picture
This issue has been solved. See solution.

Secondary RVG not showing after remote switch back to primary

vxprint -VPI

showing rlink active.

Operating Systems:

Comments 1 CommentJump to latest comment

Wally_Heim's picture

Hi Jomy,

What version of SFW-HA are you using?

I'm guessing that you are looking in VEA to the Secondary RVG to show up?  Is so you should try making a connection to both the Primary and the Secondary from VEA.  Replication Network generally only shows the RVGs of the nodes that it is connected to.  if you are only connect to the Primary then you will only see the primary.  However, if you are only connected to the secondary then you will only see the secondary RVG.  And if you are connected to both primary and secondary, then you should see the RVGs for both the primary and the secondary.

The "vxrlink -VPl" command shows all of the Rlinks with a RDG on the node where it is run.

Thank you,

Wally

SOLUTION