Endpoint Protection

Before last week , SEP11.0.6 and workstation 8 could work together on my windows 7 x64 system.

But when I upgraded SEP from 11.0.6 to 12.1, vmware virtual machine with bridged network could not get ip address from my dhcp server. The network status in my virtual machine changed from enabled to unavailible, and then from unavailible to enabled, repeated several times. At the end, a notice show me which indicate that there was a ip address conflict.

If I disabled the firewall, the virtual machine could get correct ip address from dhcp server. My SEP installed with all features and with default settings.

So I called 800 and opened a case. He did not solve this question via remote control my computer.

The last, I did the following:

--uninstall SEP and workstation;

--reboot

--install SEP 12.1 and reboot

--install SEP 12.1 RU1 and reboot

--install vmware workstation 8 and reboot

--make sure firewall keep enable and start my virtual machine

But the problem occured as before.

Somebody can help me solve this question?

Try out

http://www.symantec.com/business/support/index?page=content&id=TECH95300&actp=search&viewlocale=en_US&searchid=1322725851871

Can also peep into

Best Practice for Symantec Endpoint Protection Scheduled Scans in VMWare
http://www.symantec.com/docs/TECH95928

Best Practices for Symantec Endpoint Protection integration with Workspace Virtualization (formerly SVS)
http://www.symantec.com/docs/TECH94157

Best Practices for Symantec Endpoint Protection in virtual environments
http://www.symantec.com/docs/TECH95300

Sorry, all these TechDocs did not take affect on my case.

Any suggestion?

Hi

https://www-secure.symantec.com/connect/articles/troubleshooting-articles-symantec-endpoint-protection-version-121