Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

SEP 12.1, Wie kann ich bei unmanaged Clients die Laufzeit der Lizenz herausfinden?

Created: 28 Nov 2012 • Updated: 29 Nov 2012 | 9 comments
This issue has been solved. See solution.

Hallo zusammen,

ich habe auf einem unmanaged Client, wie im Artikel http://www.symantec.com/business/support/index?page=content&id=HOWTO55368 beschrieben, die Lizenzdatei eingespielt. Jetzt würde ich gerne sehen, wie lange diese Lizenz am Client PC gültig ist, kann es aber leider nirgends finden. Wäre toll, wenn mir jemand helfen könnte. :-)

Vielen Dank

 

Martin

Comments 9 CommentsJump to latest comment

.Brian's picture

Did you create the unmanaged install from your SEPM?

If so, it should be valid for however long it shows in your SEPM when you input the license file.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

lugggy's picture

Thank's for your fast reply. :-)

I try in english..

No, i don't use the Manager. It is an standalone PC. I only install the x64-client software and

put the license-file into th input box.

After doing that, I hoped there will be a place where i can found the contract period.

 

Thanks

 

Chetan Savade's picture

Salut,

Vérifiez avec le fichier de licence Symantec.

Fichier de licence doit contenir cette information.

Chetan Savade
Sr Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

lugggy's picture

Salut,

yes, from the license file can I read the duration.
But to be sure that the license was also recorded, I would check this in the user interface from Symantec again gladly.

 

thanks

Chetan Savade's picture

Hi,

All the license related information is available on the SEPM console.

 

Chetan Savade
Sr Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

lugggy's picture

Hi,

I understand that maybe wrong, but I do have the SEPM Console installation only one centralized server, right?

For a standalone PC I only install the client software without the management software, right?

Must now go back home until tomorrow ... :-)

Thanks for your patience
 

greg12's picture

After successful licensing of the client, the SLF file should be found here:

Pre-Vista:

  • Drive:\Documents and Settings\All Users\Application Data\Symantec\Symantec Endpoint Protection\silo_identification\Data\Config

Vista and later:

  • Drive:\ProgramData\Symantec\Symantec Endpoint Protection\silo_identification\Data\Config

See the document you have cited (item 4). Check for the sep.slf file. For unmanaged clients, I don't know another method.

lugggy's picture

Hi all,

Nice! In the path I have found my license. Better than nothing! ;-)

Many Thanks for your help!

Mithun Sanghavi's picture

 

Hallo,

Symantec Endpoint Protection ist ein Enterprise Product.

Es gibt keine Möglichkeit, den Ablauf der Lizenz auf einer nicht verwalteten Symantec Endpoint Protection-Client zu überprüfen.

Eine Arbeit um für diese wäre die. Slf (Lizenz-Datei) öffnen und überprüfen Sie das Ablaufdatum.

Hoffe, das hilft!

Mithun Sanghavi
Senior Consultant
MIM | MCSA | MCTS | STS | SSE | SSE+ | ITIL v3

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

SOLUTION