Endpoint Protection

Hi ALL,

I wish to setup location switching awarenees in my test enviroment. There is require 3 location as below.

* Default [Dafault]  - When the user is not using LAN and Wireless

* Wireless - when the user using wireless

* LAN - when the user using LAN

For the wireless and LAN location I have no issues. But when I come to Default. It not work but logically what I think is working. The setting as below.

Kindly advice.

do you want them to apply default location whenever they are off network then you can simply couple dns criteria along with doesn't use wireless & doens't use Ethernet.

Hi,

Please check the below articles may these can help you.

https://support.symantec.com/en_US/article.HOWTO65757.html

https://support.symantec.com/en_US/article.TECH98211.html

https://support.symantec.com/en_US/article.HOWTO81170.html

https://www-secure.symantec.com/connect/forums/how-configure-location-awareness-laptops

https://support.symantec.com/en_US/article.TECH97369.html

https://www-secure.symantec.com/connect/forums/location-awareness-and-turning-policies

if you want to have other criteria set as default do you have select this location as default in case of conflict? 

It should then default to this policy if it doesn't meet the other criteria or if the criteria conficts. 

Hi,

After see the suggestion given i have work around on it. The default location with conflict is set but still not work. 

With the use of condition below it work.

Condition

If there is no any network connection

AND

if any DNS server IP address is not among the addresses below:

x.x.x.x