Video Screencast Help
Protect Your POS Environment Against Retail Data Breaches. Learn More.

SFHA Solutions 6.0.1: Using Veritas Cluster Server Simulator

Created: 06 Nov 2012 • Updated: 06 Nov 2012 | 7 comments
Diana Pham's picture

Veritas Cluster Server (VCS) Simulator enables you to simulate and test cluster configurations. You can use VCS Simulator to view and modify service group and resource configurations and test failover behavior. VCS Simulator can run on a stand-alone system and does not require any additional hardware. You can install VCS Simulator only on a Windows operating system.

VCS Simulator runs an identical version of the VCS High Availability Daemon (HAD) as in a cluster, ensuring that failover decisions are identical to those in an actual cluster.

Using VCS Simulator, you can test configurations from different operating systems. For example, you can run VCS Simulator to test configurations for VCS clusters on Windows, AIX, HP-UX, Linux, and Solaris operating systems. VCS Simulator also enables you to create and test global clusters.

You can administer VCS Simulator from the Java Console or from the command line.

To download VCS Simulator, see:

http://go.symantec.com/vcsm_download

For more information on installing and administering VCS Simulator, see:

VCS documentation for other releases and platforms can be found on the SORT website.

Comments 7 CommentsJump to latest comment

Herve GREGOIRE's picture

Hello,

I just install windows 8 on my laptop, but i am not able to install the las version of VCS Simulator.

The only one, is 5.1 but when i create a new cluster in simconfig.txt, I cannot save it because the file open by another application...

Do you have an idea ?

Thanks

Varadarajan's picture

Hello,

VCS Simulator 6.0.1 is available for download from http://go.symantec.com/vcsm_download.

I understand that VCS Simulator on Windows 8 is not qualified yet. However, an SME informed that he was able to configure and run VCS Simulator 6.0.1 on Windows 8.

Can you check?

Thanks,

Varad

 

mikebounds's picture

The link http://go.symantec.com/vcsm_download has changed - where can Simulator be downloaded from now?

Thanks

Mike

UK Symantec Consultant in VCS, GCO, SF, VVR, VxAT on Solaris, AIX, HP-ux, Linux & Windows

If this post has answered your question then please click on "Mark as solution" link below

ashirodk's picture

Mike: We will fix the link above. Thanks for pointing this out.

In the meantime, please use the direct download link: https://www4.symantec.com/Vrt/offer?a_id=89446

You will need a (free) SymAccount to log in.

 

Regards,

Amit.

Jeff Foglietta's picture

Having an installer problem with the file "VCS_Simulator_6.0.1_for_Windows" on my Windows 7 Laptop ... Is anybody else having this issue? and How soon can we expect a fix?

Jeff Foglietta

Practice Lead - Data Protection and High Availability

JanVH's picture

Same here...installer fails on Windows 7 with "Error 1721. There is a problem with this Windows Installer package". Simulator 5.1 installs just fine...

subodhj's picture

Hi,

If you are installing it on a 64 bit system you can try installing using the ‘run as administrator’ option. That should get you through the install (But please do note, you will also have to launch the VCS Simulator using the same ‘run as administrator’ option).

if you are stiil getting this error then this error may be due to a custom action inside the MSI which installs VC runtime (vcredist_x86) which might be failing here. Looks like vcredist_x86 is already present on your system and hence when it is again launched by the simulator installed it is going into the maintenance mode (repair\uninstall) which is not expected by the installer and installer is failing.

As workaround, you can uninstall the already installed vcredist_x86 from the system (from add\remove program) and then install simulator MSI.

Again if it does not solve the issue (Most probably it should as I just tried installing simulator MSI on my win 7 laptop and got the same issue later however when I uninstalled vcredist_x86, it worked fine for me.) Pls run the installer by enabling the verbose logs (msiexec /I <path of the simulator MSI> /L*V <path of the log file>) and provide us the logs.

- Subodh