Ghost Solution Suite

 View Only

  • 1.  Show Imaging Status (% and Time)

    Posted Nov 25, 2015 01:59 AM

    In the old GSS 2.5 the system basicly started a ghostcast with Precentage and Time data on the Capture or Deploy of the Image.

    Is there a way to get that data from the Console?

    I found the Opton:

    "Display Imaging Status on console" but this does not seem to do anything.



  • 2.  RE: Show Imaging Status (% and Time)

    Posted Nov 25, 2015 01:14 PM

    I´m trying to check for GSS 2.5, but for GSS 3.0 is Ghost Solution Suite Console -> Tools -> Options (Global tab):

    DSImagestatus.png

    Regards,

    Fábio Sanches



  • 3.  RE: Show Imaging Status (% and Time)

    Broadcom Partner
    Posted Nov 27, 2015 08:15 AM

    Hi AaronCooper,
    Hi Fabio Sanches
     

    I´m quite sure this doesn´t work because it is only releated if you are using rdeploy (which isn´t developed nor supported anymore).
    It would be a good idea to make this also work with ghost!


    Network23



  • 4.  RE: Show Imaging Status (% and Time)

    Trusted Advisor
    Posted Nov 27, 2015 09:19 AM

    I agree with Network23 -RDeploy used to send back status messages to the console for imaging updates. This was most useful... but unfortunately a Ghost switch which provides this functionality does not yet seem to exist.

    Kind Regards,

    Ian./