Video Screencast Help

SNAC 12.1 Features Question

Created: 05 May 2013 • Updated: 26 May 2013 | 4 comments
D@ry1's picture
This issue has been solved. See solution.

Hey Guys,

 

These is our scenario, we set our SNAC to check if a client has a SEP and if not it will drop the client to the quarantine, we were asked to make the SNAC not block the client but to just report to the SEPM that that client has missing requirement. is it possible? I cant find it on the console.

 

Thanks,

Comments 4 CommentsJump to latest comment

.Brian's picture

In the HI policy on the Requirements tab, select which requirement you want this to be for and edit it. Check the box for "Allow the Host Integrity check to pass even if this requirement fails"

Yes, it's possible

On the Home page, under Endpoint Status, what shows for Host Integrity Failed? It should show here.

Or go to Monitors >> Logs

Select Computer Status and click Compliance Options >> click dropdown for Host Integrity Status and select which one you need. Click OK to see the results.

untitled_11.JPG

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

SOLUTION
D@ry1's picture

Thanks' I'll try this once I got back to the office,

Chetan Savade's picture

Hi,

Could you please update this thread.

Chetan Savade
Sr Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

D@ry1's picture

Thanks for reminding me.