Video Screencast Help

Snapshots failing after running integrity check job

Created: 23 Mar 2011 • Updated: 28 Mar 2011 | 1 comment
This issue has been solved. See solution.

I only had server space management jobs running on my server and was getting close to maxing out on space, so i decided to check to run an integrity job and had Delete lost proteced data files, Delete unrecoverable protected data files and Perform CRC all checked.  Since that job ran every single snapshot for all of my clients has failed.  It fails right away on the client when it usually in looking at previous snapshots I believe.  On the Server there are 5 errors marked in the event viewer.  Server BTW is Win 2003 with RS 7.0 SP1.  Here are the 5 in the order they occur and are all are timestamped with exact same time.  Again this is ALL clients.  Don't know if I can just delete all the .blobs and start over or what to do really, but I know I need my data backed up.  I've since turned off the integrity job.  Again I'm drawing the conclusion that it was the integrity job, the hard drive seems fine and disk checks all report back good, so that was my logical guess since everything has failed since then.

 

Computer: SERVER
Description:
There was an error opening one of the raw data storage files for read: 20950
 Local Event Code: 0xc0080019
System Event Code: 0x0000006e: The system cannot open the device or file specified. 
SbsName: SERVER04, SbsKey: 31, 33
 
Computer: SERVER
Description:
Unable to allocate a raw data stream.
 Local Event Code: 0xc0080012
System Event Code: 0x00000000
SbsName: SERVER04, SbsKey: 31, 33
 
Computer: SERVER
Description:
There was an error accessing the raw storage while writing a block. More information is available in the preceding event log messages.
 Local Event Code: 0xc0070002
System Event Code: 0x00000000
SbsName: SERVER04, SbsKey: 31, 33
 
Computer: SERVER
Description:
Call to DSFileSystem method failed in Full System Recovery Agent.
 Local Event Code: 0xc00d0009
System Event Code: 0x00000000
SbsName: SERVER04, SbsKey: 31, 33
 
Computer: SERVER
Description:
An error has occurred during a client job. More information is available in the preceding event log messages.
 Local Event Code: 0xc0130007
System Event Code: 0x00000000
SbsName: SERVER04, SbsKey: 31, 33
 
 

Comments 1 CommentJump to latest comment

Kevin Brainard's picture

Problem was a bad snapshot corrupted my recovery directory and no files were able to be written to that directory.  I created a new directory on same HD, then moved all of the recovery files from old directory to new and then disabled and deleted original directory.  

All snapshots works as normal again.

SOLUTION