whats the limitation?

are you planning to upgrade on the same server? or you want to upgrade on new hardware ?

Would need more detailed info on what your limitations are before advising...

ok, thanks for your reply.

the free space on the partition on which I want to install (upgrade) my SEP Management Server is far less than the required 5GB.

I cloned a VM, but the provisioning is thick so I cannot extend the volume.

My plan would be to install a new Management Server with the new 12.1 version, but I'm not quite sure how to implement this one in the production environment.

Hi,

So check this thread

https://www-secure.symantec.com/connect/forums/transferring-one-server-another

Symantec Endpoint Protection 11.x: Best Practices for Disaster Recovery with the Symantec Endpoint Protection Manager

http://www.symantec.com/business/support/index?page=content&id=TECH102333

Hi,

The SEP 12.1 SEPM upgrade installer requires three times the current database size (sem5.db) if upgrading from pre-12.1 SEPM with the embedded database only.

Hi,

ok, so I solved the space on the boot/system disk. I booted with Ubuntu and extended the drive after enlarging it from within VmWare. I had to reclone it first because it had to be a Basic disk.

Now the questions:

- Can I upgrade the cloned W2K3 server with embedded SQL database to W2K8 and seperate the database?

- Can I connect the new SEP 12 version with the old V11 database?

"In the end" I want to have the following configuration for my SEP server:

- Windows 2008 R2 64 bits

- Symantec Endpoint Protection Server version 12.1

- Database on seperate SQL 2008 server

Hi,

Currently if you are using embedded dabase you can't connect SQL 2008 datbase.

You can follow this artical.

 Symantec Endpoint Protection 11.x: Best Practices for Disaster Recovery with the Symantec Endpoint Protection Manager

http://www.symantec.com/business/support/index?page=content&id=TECH102333

check this thread

https://www-secure.symantec.com/connect/forums/transferring-one-server-another

Hi,

thanks for your reply. I will look into the article.

Symantec will stop the support for the version 11.x version on october 1st, 2012. What are the consequences for my environment?

Will I still be able to use the old client software even if I upgrade my Management Server?

Hello,

Currently I'm upgrading the cloned 1.x server and I have to enter the reporting and the web services port.

Standard is 8445 and 8444 however, the 8444 port is the server port (error message stating this).

The 8445 port is not mentioned in the used port list for 11.x and 12.x

So, which port can I use.

In our firewall all the standard ports are used:

TCP 1433,2638,2967,8005,8014,8443,9090,https and https

and UDP 1812 and 39999

greetings

Hi,

http://www.symantec.com/business/support/index?page=content&id=TECH163787

Hi,

While doing an upgrade from SEP 11.x to SEP 12.1 you will see the following page.

 If above ports aren't used already then you can continue with them.

 Reference: https://www-secure.symantec.com/connect/articles/s...

please an answer on the following question?

Symantec will stop the support for the version 11.x version on october 1st, 2012. What are the consequences for my environment?

Will I still be able to use the old client software even if I upgrade my Management Server?

thanks in advance,

Pim

Hi,

You can check End of life support date

http://www.symantec.com/business/support/index?page=releasedetails&key=54619