SWG - SSH/remote install
Updated: 02 Nov 2011 | 4 comments
This issue has been solved. See solution.
Dear All,
can be SWG installed remotely (e.g with base management card) and can be reached via SSH, telnet (e.g. putty)?
Thanks in advance!
Viktor
Discussion Filed Under:
Comments
On a SWG applaince there is
On the physical applaince the iDrac should be usable for management as it is providing console access to the hardware and does not have any impact to or from the SWG software. However symantec will not provide direct support for the remote management features of the dell hardware.
On a SWG applaince there is no ssh or telnet access enabled on SWG. The virtual applaince you may be able to use VMware to remotely access the console.
Remote Install
A few things to point out, the 8450 doesn't actually have a DRAC card. Also depending on how you deploy the Web Gateway there is normally some cable changing that needs to happen during the install so doing tihs remotely is going to be a challenge.
Cheers,
Kevin
Thanks for the
Thanks for the clairification/info Kevin.
Hi, And even if you mount the
Hi,
And even if you mount the .iso image on the 8490 via iDRAC is not going to work.
Already tested this.
Federico
Would you like to reply?
Login or Register to post your comment.