Deployment Solution

 View Only
  • 1.  Symantec Deployment solution 7.5 -Clients unable to boot into winpe

    Posted Nov 20, 2014 01:30 PM

    Greetings, I have installed a fresh installation of Symantec Deployment 7.5 , that I am trialing.

    All services are installed and running, I add a winpe pre boot configuration , select in NBS general setting to have clients boot off this option, save...

    However when i PXE boot clients , I always only get Press F8 for menu Next device (Bios\efi)

    I have also noticed , despite making changes to Pre boot config, the sbsconfiguration file does not change to reflect the chages make.

     

    Struggling with this, any help would be greatly appreciated,

     

    Kind Regards

    Denis

     



  • 2.  RE: Symantec Deployment solution 7.5 -Clients unable to boot into winpe

    Broadcom Employee
    Posted Nov 25, 2014 09:10 AM

    Hello,

    Are we using SSL?

    Check from Site server configurations that SBS is showing green light on that server.

    Check DStask logs if any problems updating the NBSConf xml



  • 3.  RE: Symantec Deployment solution 7.5 -Clients unable to boot into winpe

    Posted Nov 26, 2014 03:00 PM

    Did you regenerate the Preboot Config?

     

    Settings --> Deployment --> Preboot Configurations?



  • 4.  RE: Symantec Deployment solution 7.5 -Clients unable to boot into winpe

    Posted Nov 27, 2014 05:59 AM

    Thanks for your comments, i left the system over night and seemed to work the following day despite using the agent on the console to update...., not really sure.

     

    Thanks

    Denis