Video Screencast Help

symantec IP addresses

Created: 16 Jan 2013 • Updated: 16 Jan 2013 | 3 comments
julrendo's picture
This issue has been solved. See solution.

good morning.

I need your help to know what the IP address range from signature downloads symantec web site, to the Enpoint Symantec Protection Manager, to add these addresses in the firewall of us.

thanks you.

Comments 3 CommentsJump to latest comment

Brɨan's picture

Liveupdate cannot connect to server - What IP-s (IP addresses) should be configured as Firewall and Proxy exceptions to enable LiveUpdate?

Article:TECH163079  |  Created: 2011-06-23  |  Updated: 2012-02-23  |  Article URL
As we use AKAMAI for content distribution, there is no certain IP address range that can be configured. At this stage akamai consists of 70.000 servers.
Instead of IP addresses, customer should allow connections to the following domains:

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

Ashish-Sharma's picture



 check this link

Check this thread

Thanks In Advance

Ashish Sharma

hforman's picture

I know this is a bit off-topic, but, if you are using INSIGHT, there are other web sites that are used via https.  I just opened up * but there are articles about the specific sites that are needed for all of the new features.