Video Screencast Help
Give us your opinion and win with Symantec! Please help us by taking this survey to tell us about your experience with Symantec Connect, so that we can continue to grow and improve.  Take the survey.

Symantec Messaging Gateway Hyper-v Ethernet problems

Created: 08 Oct 2012 • Updated: 08 Oct 2012 | 5 comments
This issue has been solved. See solution.

hi,

   Symantec Messaging gateway 10.0 hyper-v 2.0 ethernet problems.Help plesea

Comments 5 CommentsJump to latest comment

TSE-JDavis's picture

The Messaging Gateway does not work with Hyper-V. You will need to use the supported platform of VMWare's ESXi 4.0 or 5.0.

Please read our install guide for more information:

http://www.symantec.com/docs/DOC5741

oykunsatis's picture

Merhaba Gökhan,

Maalesef SMG Hyper-V desteklememekte, sanallaştırma alt yapısı olarak Vmware ESXi kullanabilirsin. Ayrıca donanımsal olarak Appliance şeklinde de mevcuttur.

Hi Gökhan,

As JDavis mentioned above Hyper-V not supported for SMG, you can use Vmware ESXi as a Virtualization baseline and also there's a physical appliance available.

Regards,

Oykun

Gokhan Varol's picture

Merhabalar,

  Sorunu ben Hyper-v üzerinden legacy network ekleyerek problemi giderdim ve şuan çalışıyor Yardımınız için teşekkür ederim.

Hi ,

    Hyper-V legacy out of the question, I am adding a network problem. Thank you for your help.

Regards,

SOLUTION
oykunsatis's picture

Merhaba,

Hyper-V üzerinde çalışan SMG'nin Symantec tarafında resmi desteği olmadığını hatırlatmak istiyorum,bilgine.

jk0's picture

Is this hyper-v 2.0 as a standalone or on Windows Server 2008? Can we get the basic configuration and other details of the hyper-v deployment on which SMG was being installed?

Reiterating again that currently we do not support SMG on hyper-V.