Virtual Secure Web Gateway

Where can I find a step by step, how to configure the network interface on an ESX 4.1, to put the Symantec Web Gateway 5.0.2 virtual "inline mode"?

I have a big problem in VMWARE configure the interface to deploy SWG 5.0.2

Hi,

chapter 4 of the SWG getting started guide should cover your needs.

http://www.symantec.com/business/support/index?page=content&id=DOC4247&key=58161&actp=LIST

HTH,

Federico

i have same issue, but implementation guide tells you only uper level information.

actually issue is how we achieve what implementation guid tells.

if some one have implemented virtuall edition please write here step by step process.

Adv thanks.

shoaib

link to another thread asking similar questions about Inline mode on the virtual SWG

https://www-secure.symantec.com/connect/forums/symantec-web-gate-way-virtual-edition-default-password

Note my answer on that thread about the physical NICs required and their allocation to the virtual switches, which are then connected to the SWG virtual NICs.

Dear Mirza,

By default there are 4 NIC in WebGateway Virtual Edition and all of them are bind to VM network.

U need to create one more internerl network with in ESXi and bind 3 NIC To internal network that ll b ur LAN and only one NIC To VM network tht will work as WAN.