Have a win server 2003 sp1, backupexec 10d rev. 5629, devise is a HP storage work dlt vs160 tapes are vs160gb. Problem i'm encountering: tapes eject put in a new one and ejects again with a few beeps won't complete job. Verified tape drivers = veritas, ran a clean tape and tried new tape but ejects the new tape. Had to cancel the job to move on.

Here are some of the previous job log errors:
Job ended: Wednesday, April 22, 2009 at 2:01:20 AM
Completed status: Failed
Final error: 0xe00084ec - Error reading/writing data from/to the media.
Final error category: Backup Media Errors

For additional information regarding this error refer to link V-79-57344-34028

Errors
Click an error below to locate it in the job log
Backup- C: AOFO: Initialization failure on: "D:". Advanced Open File Option used: Symantec Volume Snapshot Provider (VSP).
AOFO: Unable to get minimum quiet time for physical volumes. Reduce the activity on these volumes, or wait and run the backup when there is less activity on the volumes.
Backup- D: DataStorage device "HP 1" reported an error on a request to write data to media.
Error reported:
Data error (cyclic redundancy check).
This could be caused by either a dirty tape drive, bad media, or a SCSI problem.
V-79-57344-34028 - Error reading/writing data from/to the media.

Not sure what to do?