Endpoint Protection

 View Only

  • 1.  Thin client question

    Posted Oct 23, 2013 10:15 AM

    Hi,

    In the future we might migrate to a thin client enviroment, maybe mixed with thick clients.
    My simple question:

    Is it possible to manage / install thin clients on my current SEPM 12.1.x enviroment, and for instance how is this install package called?

    Thanks,

    LEVD



  • 2.  RE: Thin client question

    Posted Oct 23, 2013 10:20 AM

    You should have no problem with this.

    http://www.symantec.com/docs/TECH94839



  • 3.  RE: Thin client question
    Best Answer

    Posted Oct 23, 2013 10:21 AM

    Did you see this articles

    Instructions for installing Symantec Endpoint Protection on the XP Embedded Operating System

     

    Article:TECH94839  |  Created: 2009-01-01  |  Updated: 2011-01-20  |  Article URL http://www.symantec.com/docs/TECH94839

     



  • 4.  RE: Thin client question

    Trusted Advisor
    Posted Oct 23, 2013 10:27 AM

    Hello,

    I believe, you may like to see these Articles:

    Instructions for installing Symantec Endpoint Protection on the XP Embedded Operating System
     

    Symantec Endpoint Protection support for embedded operating systems

    http://www.symantec.com/docs/TECH106027

     
    NOTE: The procedure below was developed using HP t5730 thin clients and may not apply to other models hosting the XP embedded OS.
     
    The procedure below is NOT supported by Symantec Technical Support and is provided only for your convenience.
     
    Incase, if it does not work, you would have to Purchase the Symantec Endpoint for XP Embedded as that's the product specifically created for Thin clients.
     
    Hope that helps!!


  • 5.  RE: Thin client question

    Posted Oct 23, 2013 10:34 AM

    Thank all, very helpfull.

     

    LEVD