Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

troubleshoot article

Created: 27 Jun 2014 • Updated: 29 Jun 2014 | 2 comments
This issue has been solved. See solution.

Any troubleshooting article which give me the information about backup failure with cause and solution?

Comments 2 CommentsJump to latest comment

Nicolai's picture

See the Netbackup status code reference guide.

http://www.symantec.com/docs/DOC5181

From a Netbackup master server, open a command prompt and type bperror -S {status-code}. That will provide the same information as in the reference guide.

There is also the trouble shooting guide

http://www.symantec.com/docs/DOC5180

Best Regards

Nicolai

Assumption is the mother of all mess ups.

If this post answered your'e qustion -  Please mark as a soloution.

SOLUTION
RamNagalla's picture

hello have a look into the below T/N

Status code chart

though the netbackup end with the same status code the reason behind might be different depends on the enviornment and the server behiver..

the above tech note will giveyou the generic info about the errors

having the better understaind on the enviornment will help you most while fixing the issues.

good luck