Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

Unable to use vcs commands after installation of vcs

Created: 25 Jun 2014 • Updated: 26 Jun 2014 | 3 comments

Hi,

After installation of VCS 6.0 in Sol10,I am unable to run even hastatus -sum command it says, command not found however, llttab shows the O/p as

bash-3.00# cat /etc/llttab
set-node papa
set-cluster 37074
link e1000g0 /dev/e1000g:0 - ether - -
link e1000g1 /dev/e1000g:1 - ether - -
link-lowpri e1000g2 /dev/e1000g:2 - ether - -

=====================================

bash-3.00# cat /etc/gabtab
/sbin/gabconfig -c -n1

============================

checked with pkginfo,

bash-3.00# pkginfo |grep vcs
system      VRTSvcs                          Veritas Cluster Server by Symantec
system      VRTSvcsag                        Veritas Cluster Server Bundled Agents by Symantec
system      VRTSvcsea                        Veritas High Availability Enterprise Agents by Symantec

============================================================================

bash-3.00# df -h
Filesystem             size   used  avail capacity  Mounted on
/dev/dsk/c1t0d0s0       14G   2.3G    12G    17%    /
/devices                 0K     0K     0K     0%    /devices
ctfs                     0K     0K     0K     0%    /system/contract
proc                     0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
swap                   2.2G   1.1M   2.2G     1%    /etc/svc/volatile
objfs                    0K     0K     0K     0%    /system/object
sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
/dev/dsk/c1t0d0s5      9.6G   4.3G   5.3G    45%    /usr
/usr/lib/libc/libc_hwcap1.so.1
                       9.6G   4.3G   5.3G    45%    /lib/libc.so.1
fd                       0K     0K     0K     0%    /dev/fd
/dev/dsk/c1t0d0s3      1.9G    93M   1.7G     5%    /var
swap                   2.2G    44K   2.2G     1%    /tmp
swap                   2.2G    32K   2.2G     1%    /var/run
/dev/dsk/c1t0d0s4      2.9G   819M   2.0G    29%    /opt
/dev/dsk/c1t0d0s6      103M   1.0M    92M     2%    /temp
/dev/dsk/c1t0d0s7       18G    19M    18G     1%    /export/home
/vol/dev/dsk/c0t0d0/sol_10_910_x86
                       2.0G   2.0G     0K   100%    /cdrom/sol_10_910_x86
/dev/odm                 0K     0K     0K     0%    /dev/odm
/dev/vx/dsk/datadg/datavol
                       200M   103M    91M    54%    /pictor

==========================================================

bash-3.00# vxdisk list
DEVICE       TYPE            DISK         GROUP        STATUS
disk_0       auto:none       -            -            online invalid
disk_1       auto:none       -            -            online invalid
disk_2       auto:cdsdisk    datadg01     datadg       online
disk_3       auto:cdsdisk    datadg02     datadg       online

PLease help..

Operating Systems:

Comments 3 CommentsJump to latest comment

mikebounds's picture

hastatus command is in /opt/VRTSvcs/bin and there is a sym link in /opt/VRTS/bin, so add either of these to your path or specify complete path.  I would advice adding  /opt/VRTS/bin to your path:

export PATH=$PATH:/opt/VRTS/bin

Mike

UK Symantec Consultant in VCS, GCO, SF, VVR, VxAT on Solaris, AIX, HP-ux, Linux & Windows

If this post has answered your question then please click on "Mark as solution" link below

Marianne's picture

'command not found' is a Unix error, saying that the current shell cannot find the command in your PATH variable.

You will find this recommendation in the sfha_install guide (Add the paths to your .profile to make it permanent):

Setting environment variables
Most of the commands used in the installation are in the /sbin or /usr/sbin
directory. Add these directories to your PATH environment variable as necessary.
After installation, SFHA commands are in /opt/VRTS/bin. SFHA manual pages
are stored in /opt/VRTS/man.

Add the following directories to your PATH and MANPATH environment variable:

■ If you are using Bourne or Korn shell (sh or ksh), enter the following:
$ PATH=$PATH:/usr/sbin:/opt/VRTS/bin
$ MANPATH=/usr/share/man:/opt/VRTS/man:$MANPATH
$ export PATH MANPATH

■ If you are using a C shell (csh or tcsh), enter the following:
% set path = ( $path /usr/sbin /opt/VRTS/bin )
% setenv MANPATH /usr/share/man:/opt/VRTS/man:$MANPATH

Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows
Handy NBU Links

Gaurav singh's picture

Thanks marianne.. got it and issue is resolved.