Video Screencast Help

unmanage clients

Created: 26 Apr 2013 • Updated: 29 Apr 2013 | 6 comments
This issue has been solved. See solution.

hi

how to find out the client where manage antivirus not avaialble?

Comments 6 CommentsJump to latest comment

AJ_01's picture
What does it mean to set a client as an Unmanaged Detector?
Article:TECH105722  |  Created: 2008-01-26  |  Updated: 2012-07-26  |  Article URL http://www.symantec.com/docs/TECH105722

Regard

AJ

SOLUTION
SameerU's picture

Hi

Pleaser refer tha folllowing details

http://www.symantec.com/business/support/index?pag...

Regards

W007's picture

hello,

You can configure a unmanaged client report and install on them

Look some of discussion

https://www-secure.symantec.com/connect/forums/sep...

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

technical_specialist's picture

Go to client Tab in SEPM

Open Find Unmanage Tab from Task.

Enter the IP range here. (Eg - From 169.1.129.1 to 169.1.129.50)

Enter the credential detail and search now.

Clients will reflect below in Unmanage Computer Tab.

Select the client and Select Start installation.

Deploying client software with Find Unmanaged Computers
Article:HOWTO17942  |  Created: 2009-01-02  |  Updated: 2009-01-17  |  Article URL http://www.symantec.com/docs/HOWTO17942
SameerU's picture

Hi

Any update on the provided information

Regards

Brɨan's picture

Make sure the client has NTP installed. Go to the SEPM >> Clients page and select the client you want to be an unmanaged detector. Right click and select "Enable as Unmanaged Detector"

untitled_10.JPG

In order to receive notifications when unmanaged clients are found. Go to the Monitors page >> Notifications tab >> Notification Conditions. Click Add >> Unmanaged Computers. Edit this box as needed and Click OK to save.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.