This is not possible to receive notification of unmanage systems.

https://www-secure.symantec.com/connect/ideas/notification-unmanage-database

you will get the notification, however filtering has to be done manually.

waiting for the revert. Is any solution on same?

pete- kindly share the step pls.

agree with pete. Also find one link https://www-secure.symantec.com/connect/forums/not... hope it help u.

your issue is sort out?

Please do the following

    1.    In the console, click Clients.
    2.    Under View Clients, select the group that contains the client that you want to enable as an unmanaged detector.
    3.    On the Clients tab, right-click the client that you want to enable as an unmanaged detector, and then click Enable as Unmanaged Detector.
    4.    To specify one or more devices to exclude from detection by the unmanaged detector, click Configure Unmanaged Detector.
    5.    In the Unmanaged Detector Exceptions for client name dialog box, click Add.
    6.    In the Add Unmanaged Detector Exception dialog box, click one of the following options:
    ◦    Exclude detection of an IP address range, and then enter the IP address range for several devices.
    ◦    Exclude detection of a MAC address, and then enter the device's MAC address.
    7.    
    8.    Click OK.
    9.    Click OK.
To display the list of unauthorized devices that the client detects
    1.    In the console, click Home.
    2.    On the Home page, in the Security Status section, click More Details.
    3.    In the Security Status Details dialog box, scroll to the Unknown Device Failures table.
    4.    Close the dialog box.

Regards

Please mark as a solution if it works

hi i am using 11.0.7. These all steps will be thr?

Yes

Hey,

   Right now my exact version is 11.0.6. I have found only the attach below options. Pls do needful.

Regard

Jack

Other way is -

Login to the SEPM Console

Go to Client TAB

There 2 tab avail in Client(View Clients & Tasks)

Click on Find Unamange Computers in Tasks

Enter the Ip range, User Name, Password & Domain Name then Search Now

It will take some time but all unamange system will display below in unmanage option.

Select all and start the installation from below "Install Window only" Component.

Hope this information will help you..

Thanks for the kind revert. I will be filtering the Report after recieve the mail. Thanks a lot.

Regard

Jack