Video Screencast Help

Updating the DS for Dell 3.2 MR2 WinPE 2.1 Environment to use the drivers and tools from DTK Version 4.1

Created: 09 Aug 2012 | 2 comments

Hi - trying to get the latest DTK installed to allow deployment on the latest 12G servers.  Has anyone successfully done this and has any instructions.  I have been through several pdf guides, but it does not seem to be recognising it and allowing these new models to become available

Using Altiris 6.9 and DS for Dell 3.2 MR2


Comments 2 CommentsJump to latest comment

mhendel's picture

I too can not get the new gen dell R720 and 520 to pxe boot and run DS for Dell servers.  The x64 image boots, but the x32 bit image does not communicate with the DS console in automation mode.

mhendel's picture

I built a new winpe boot option with the dell extension. Both x86 and x64 boot to automation ok now with the right drivers, but during the capturing info process failed - server model not supported in DTK.  So it looks like I'm still using the 3.x DTK and not the 4.1.  Anyone from Symantec can help?