Video Screencast Help
Search Video Help Close Back
to help
Not able to make it to Vision this year? Get a sampling in the Best of Vision on Demand group.

Upgrade VxVM 5.0 to VxVM 5.1

Updated: 20 Oct 2010 | 2 comments
sardeshpande1975@gmail.com's picture
0 0 Votes
Login to vote
This issue has been solved. See solution.

Hi

 

I have successfuly upgraded the VxVM from 5.0 to VxVM 5.1 ..

But during reboot I am getting given below error .

VxVM sysboot NOTICE V-5-2-3410 upgrade was not completed
configuring IPv4 interfaces: eri0 qfe0.
Hostname: sundev1
VxVM  NOTICE V-5-2-3369 VxVM upgrade was not completed
WARNING: /pci@9,600000/lpfc@1/fp@0,0/ssd@w50060482cc19c1ec,0 (ssd131):
        Corrupt label; wrong magic number

WARNING: /pci@9,600000/lpfc@1/fp@0,0/ssd@w50060482d52de668,0 (ssd141):
        Corrupt label; wrong magic number

WARNING: /pci@9,600000/lpfc@2/fp@0,0/ssd@w50060482d52de647,0 (ssd277):
        Corrupt label; wrong magic number

WARNING: /pci@9,600000/lpfc@2/fp@0,0/ssd@w5006048acc19c1d3,0 (ssd267):
        Corrupt label; wrong magic number

VxVM  NOTICE V-5-2-3369 VxVM upgrade was not completed
The system is coming up.  Please wait.
checking vxfs filesystems
Running parallel replay fsck ...
UX:vxfs fsck: ERROR: V-3-20003: /dev/vx/rdsk/fsdg01/localvol:Cannot open /dev/vx/rdsk/fsdg01/localvol: No such device or address
UX:vxfs fsck: ERROR: V-3-20003: /dev/vx/rdsk/flashdg/flash01:Cannot open /dev/vx/rdsk/flashdg/flash01: No such device or address
UX:vxfs fsck: ERROR: V-3-20003: /dev/vx/rdsk/orafsdg03/db03:Cannot open /dev/vx/rdsk/orafsdg03/db03: No such device or address

I am starting vxconfigd daemon manually and starting all the volumes and mounting file system manually.

 

Any idea what could be the reason ...

 

Thansk

Sukrut S

 

Comments

Marianne van den Berg's picture
05
Oct
2010
1 Vote +1
Login to vote

See if you can find the

See if you can find the reason for:

VxVM  NOTICE V-5-2-3369 VxVM upgrade was not completed

in the installation log: /opt/VRTS/install/logs/installer#######.log

This (old) TN http://www.symantec.com/business/support/index?pag... describes a situation where upgrade _finish did not complete successfully, leaving behind .start_runed.

Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows.
Handy NBU links

avsrini's picture
16
Oct
2010
0 Votes 0
Login to vote

How was the product upgraded?

Hi Sukrut,

Can you share with us how you've performed the upgrade?

As Marianne explained, the message is reported because upgrade_finish was not run after upgrade_start.

Check for directory /VxVM## directory, if present rename it. If you haven't configured the product yet,

try # vxinstall to configure VxVM.

 

Regards

Srini