Hi

We have SEPM 12.1.4 two SEPM servers as replication partner in same location with sam subnet. This replication is only for high availbility and failover

We want to upgrade this 12.1.4 to 12.1.4 MP1a what are procedure to upgrade replicaiton partner

Thanks

Perhaps these will help?

Turning off replication before upgrade

Turning on replication after upgrade

#EDIT#

Oh yeah, as added verification of the above procedure, please see the below article which states:

• If your site uses replication, you must disable replication before upgrading Symantec Endpoint Protection Manager. You must disable replication at each site that replicates.

Same goes for 12.1RU4MP1a

Upgrading or migrating to Symantec Endpoint Protection 12.1.4100.4126 (RU4 MP1)

Turn off replication , Upgrade SEPM1

then upgrade SEPM2..

initiate replication

Hi

As per KB

2.Under Servers, expand Replication Partners and select a site.

3.Right-click the site, and then click Delete.

4.Click Yes.

We have to delete site or server under this site appearing

Because then as per Turnin on replication KB

1.On the console, click Admin > Servers.

2.Under Servers, expand Replication Partners and select a site.

3.Right-click the site, and then click Add Partner.

4.In the Add Replication Partner panel, click Next.

If we deted site as per remove replication KB then how we have site and Add replicaiton partner

Thank

Thanks

The second article I posted tells you how to add the replication partner back in (after you've completed the upgrade), if that's what you're asking...

Also, the initial "Delete Replication Partner" bit has to be done on all replciation partners.

Obviously, all this is provided under the assumption that you have confirmed this is a replicating SEPM environment and not just a load-balanced one (which personally seems more logical if the SEPMs are on the same subnet).

Hi

My question as per kb to remove replicaiotn

In the console, click Admin > Servers.

2.Under Servers, expand Replication Partners and select a site.

3.Right-click the site, and then click Delete

We have to delete Site or server object ?

Thanks

It does seem to suggest you delete the site.

Hi

If site deleted hen when we turning on replication as per KB

On the console, click Admin > Servers.

2.Under Servers, expand Replication Partners and select a site.

3.Right-click the site, and then click Add Partner.

4.In the Add Replication Partner panel, click Next.

Where is we find site object as above steps mentioned ?

Thanks

Oh, I getcha now.  This article explains the process in more accurate detail I think:

http://www.symantec.com/docs/HOWTO81215

So you select the local SEPM site and click "Add Exisiting Replication Partner".

Incidentally, as HOWTO81207 appears to be incorrect, I'd recommend leaving feedback on it under the "Rate this article" section on the right.

Hi,

Thank you for posting in Symantec community.

When you remove a management server at a remote site, you need to manually delete it from all sites. Uninstalling the software from one management server console does not make the icon disappear from the Servers pane on other consoles.

See Re-adding a replication partner that you previously deleted.