Video Screencast Help

Use specific network interface from BMR RedHat boot CD

Created: 30 Nov 2012


I have the following situation:

Symantec 7.1 master and client

Redhat 5.8 client and BMR boot CD

Multiple hardware network adapters. I have only one and specific adapter that is in the same VLAN as the master server. When I start from BMR redhat CD i put ip configuration for the client, but the BMR configure the first NIC avalable, and all other set to down. Normally I can't connect to the master, because the network adapter that is the only up and configured is in the wrong vlan.

how to configure the specific network interface, using the BMR CD (like in Windows BMR CD)

Thank you.