Video Screencast Help
Symantec Appoints Michael A. Brown CEO. Learn more.

V-79-57344-65072

Created: 22 Nov 2006 • Updated: 22 May 2010 | 2 comments

I keep getting this error message and the correct action is to exclude the \wbem folder in the backup , this folder has never been selected, the agent keeps crashing during backup jobs that run for more that a few hrs.

Network data connection is established between 192.168.200.5:3984 <--> 192.168.200.10:57556
V-79-57344-65072 - The connection to target system has been lost. Backup set canceled.
V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes.
V-79-57344-34110 - AOFO: Initialization failure on: "\\mail.ddchemco.com\D:". Advanced Open File Option used: No.
The network connection failed during the snapshot. Check the network, and then run the job again.

this is the error message i keep getting, if i backup that server alone it sometimes works...

Comments 2 CommentsJump to latest comment

Bank Delen's picture

Are you sure you don't have any bit collitions on your switches between your servers.

It seems you simple are losing the connection. Any reboots planned or other things that could break your connections?

Regards

Alex

shweta rege's picture

Hello,



1) Please check if the Remote agent has been installed correctly on the remote system and its version is same as Backup Exec version(10d).If not then reinstall the remote agent.

2) Add the IP address and Host name of the Remote server to LMHOSTS file and HOSTS file on media server and IP address and Host name of the Media server to LMHOSTS file and HOSTS file on Remote Server. To do this, you will need to locate the lmhosts.sam file and edit it with notepad. Add the target servers name to bottom of the file, and save. This might require a reboot for it to get loaded in to the system.

3) Please check if the Port 10000, which is the default port used by NDMP(Network Data Management Protocol) is not used by any other application. If it is used by another application, please follow the steps given in the following
Technote:

TITLE: How to change the port that NDMP uses in VERITAS Backup Exec 9.x for Windows Servers

http://seer.support.veritas.com/docs/255498.htm



Thank You,

Shweta