VMOPRCMD show drive entry double
Created: 14 Nov 2012 | Updated: 19 Nov 2012 | 13 comments
This issue has been solved. See solution.
Hi All,
Can any one help me to resolve the issue..
vmoprcmd shows drive entry double.
windows device manager and veritas gui show exact drive list. only need to correct entry on vmoprcmd-d double entry drive list
ex :- drive 0 shows 2 times ( double entry)....... drive 1 shows 2 times ( double entry).... drive 2, 3,4 shows 1 time
Discussion Filed Under:
Comments 13 Comments • Jump to latest comment
Can you show us the output?
Regards Andy
"Have you still got the box it came in?"
Yes , please find the details of drive 0, 2 & 3 shows same entry twice...
DRIVE STATUS
Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId
0 hcart3 TLD Yes 000866 000866 Yes Yes 0
0 hcart3 TLD Yes 000866 000866 Yes Yes 0
1 hcart3 TLD Yes 001138 001138 Yes Yes 0
2 hcart3 TLD Yes 001109 001109 Yes Yes 0
2 hcart3 TLD Yes 001109 001109 Yes Yes 0
3 hcart3 TLD - No - 0
3 hcart3 TLD - No - 0
4 hcart3 TLD Yes 000108 000108 Yes Yes 0
5 hcart3 TLD - No - 0
ADDITIONAL DRIVE STATUS
Drv DriveName Shared Assigned Comment
0 HP.ULTRIUM3-SCSI.000 No
0 HP.ULTRIUM3-SCSI.000 No
1 HP.ULTRIUM3-SCSI.003 No
2 HP.ULTRIUM3-SCSI.002 No
2 HP.ULTRIUM3-SCSI.002 No
3 HP.ULTRIUM3-SCSI.001 No -
3 HP.ULTRIUM3-SCSI.001 No -
4 HP.ULTRIUM3-SCSI.004 No
5 HP.ULTRIUM3-SCSI.005 No -
... & does tpconfig -d show the same duplication?
Regards Andy
"Have you still got the box it came in?"
TPCONFIG -D shows perfect .. no issues.. its shows correct drive details ( no duplication)
Any changes recently?
Have services been re-started recently?
There is a very old T/N that deals with differences between the output of the two commands - they *should* be the same - but that was drives missing from one & subsequent errors.
Possible resolution was to re-start ltid & if that doesn't correct then delete & re-create the drives.
http://www.symantec.com/business/support/index?pag...
.... as I say it's an old T/N!!
Regards Andy
"Have you still got the box it came in?"
Do you have drive sharing in place? We do and our ouput shows 4 entries for each drive, as expected.
will restore -- where there is a Will there is a way
Can you post output of "tpconfig -emm_dev_list"?
Alse tell us version of NetBackup and OS, how many media servers you have in this domain.
Authorized Symantec Consultant(ASC) Data Protection in Tokyo, Japan
hi ,
i had the same issue few days ago, and finally i need to end up with reconfiguration(delete and readd the drives) of the Drives to look them fine in VMOPRCMD
and was using Netbackup 7.1 .
i would suggest you to do the same...
Hi,
As Wr said, Ensure drive sharing is der.
Do you have two dedicated path for same drive ?
Yes, dedicated path for each media server
will restore -- where there is a Will there is a way
Thanks much guys for the Help..
Actullay the drive has been share with NDMP and media server so that its shown.. found tht with the help of symantec thanks for kind help guyssss
Abdul ... wr pointed that out in the comment above on 14th Nov - so please mark his comment as the correct solution to you issue if that was in deed the case
Thanks
Authorised Symantec Consultant
Don't forget to give a "Thumbs Up" or mark as "Solution" if someones advice has helped you.
Done my friend!!!!!
Would you like to reply?
Login or Register to post your comment.