vxconfigd daemon is not starting
Hi
I have just uninstall vxvm 3.5 and installed VxVM 5.0MP3 but during reboot i got given below error.
obpsym: symbolic debugging is available.
Hardware watchdog enabled
NOTICE: VxVM not started
configuring IPv4 interfaces: ce0 ce1 ce2 ce3.
Hostname: sunpocdd1
VxVM NOTICE V-5-2-3347 Volume Manager not started
WARNING: /ssm@0,0/pci@18,600000/lpfc@1,1/fp@0,0/ssd@w5006048ad52de642,0 (ssd335):
Corrupt label; wrong magic number
WARNING: /ssm@0,0/pci@19,600000/lpfc@1/fp@0,0/ssd@w5006048ad52de659,0 (ssd140):
Corrupt label; wrong magic number
vxdctl: Configuration daemon is not accessible
VxVM NOTICE V-5-2-3365 VxVM not started
The system is coming up. Please wait.
checking vxfs filesystems
Once system comes in single user mode then Ineed to perfom #vxconfigd -k -> #vxvol -g <dg name>startall ->mountall
Does anyone ever come across this problem....
Any help would greatly appreciated.
Sukrut S
Comments
Maybe give us a bit more info
Maybe give us a bit more info on steps taken during uninstall and new install?
Was the boot-disk encapsulated under 3.5? Did you unencapsulate before uninstalling?
When you installed 5.0MP3 - did you complete the configuration steps at the end?
Please find the installation log and post as an attachment.
If you have used 'installer' the log file will be under /opt/VRTS/install/logs/installer-xxxxxx
Which O/S version on your server?
Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows.
Handy NBU links
VxVM 5.0mp3 vxconfigd issue.
This is solaris 9 box. Boot disk is not under veritas control.
Steps to uninstall vxvm 3.5
1) vxdctl stop , vxiod -f set 0
2)Uninstall VRTS packages excpet VRTSvlic
3)install VxVM 5.0MP3 through installer
4)after installation while system was coming up I got the above error.
At single user mode I was able to start the vxconfigd -k (daemon) and start all the volumes ...
When you installed 5.0MP3 -
When you installed 5.0MP3 - did you complete the configuration steps at the end?
Please find the installation log and post as an attachment.
If you have used 'installer' the log file will be under /opt/VRTS/install/logs/installer-xxxxxx
Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows.
Handy NBU links
Just have a check for
Just have a check for install-db file under /etc/vx/reconfig.d/state.d ?
If the file is there, remove it & restart your box...
Also, what does pkgchk shows on VRTSvxvm ?
# pkgchk VRTSvxvm
Gaurav
PS: If you are happy with the answer provided, please mark the post as solution. You can do so by clicking link "Mark as Solution" below the answer provided.
try vxinstall
Hi Sardesh,
Looks like SF 50MP3 is not configured during install. Try vxinstall command
and say yes to reconfigure, and respond to 3 questions. It should work after.
Just for info, is rootdisk under SDS control and mirrored? If so there are some known
issues if the root mirror is not fully synced, it loads old kernel and uses new binary.
Verify the same and update us.
Regards
Srini
Would you like to reply?
Login or Register to post your comment.