Video Screencast Help

Where to FInd Newest Tape Drive Drivers

Created: 12 Jun 2013 • Updated: 18 Sep 2014 | 3 comments
This issue has been solved. See solution.

I am currently on 2010 R2 Build 4164 (64bit).

I am needing to update the Tape Drive drivers using the Tapeinst tool.

Where do i download the newest driver pack for tape drives?

Operating Systems:

Comments 3 CommentsJump to latest comment

SuperBrain's picture
  1. http://www.symantec.com/business/support/index?page=content&key=15047&channel=TECHNICAL_SOLUTION&basecat=DOWNLOADS

    Go to the above URL and select 'Drivers' from the filter facet on the left.

    OR
     

  2. Run Live Update a couple of times to make sure your Backup Exec is fully patched with latest service packs and/or hot fixes.
SOLUTION
Sush...'s picture

Hello Vavar,

 Refer to the following technotes

http://www.symantec.com/docs/HOWTO73431 : Installing Symantec tape device drivers by running tapeinst.exe

http://www.symantec.com/docs/TECH155307 : Backup Exec 2010 R2 revision 4164 Hotfix 153090, Device Driver Installer DDI20110315 (March 15th, 2010) - downloads

 

Thanks,

-Sush...

Hope this piece of Information Helps you... and if it does then mark this response as Solution....!!!

Larry Fine's picture

I know you didn't ask, but I suggest updating to R3 at your earliest conveneince.  Especially if you are looking for updated drivers, etc.

If you find this is a solution for the thread, please mark it as such.