Vidéos d'aide de Screencast
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

BEWS 2012 Trial Version

Created: 12 Mars 2013 • Updated: 02 Avr. 2013 | 8 comments
l'image des RickAndrei
Ce problème a été résolu. Voir la solution.

I installed the BEWS 2012 version which is only trial while waiting for the paper license to come out.

My Question is: Upon checking on the storage I tried to erase the content of the tape media but the erase button/tab is grayed out, is this the limitations of the trial version or my media server have a problem?

Thanks...

Commentaires CommentairesAccéder au dernier commentaire

l'image des pkh

No.  There is no such limitation due to BE being a trial version.

l'image des CraigV

...just make sure you're using the Symantec drivers for the device. if not, use tapeinst.exe to install the DDI drivers and try again.

Thanks!

Alternative ways to access Backup Exec Technical Support:

https://www-secure.symantec.com/connect/blogs/alte...

l'image des Larry Fine

Are you using a single stand-alone tape drive?  Or are you using a robotic library?

If you are using a robotic library, make sure that you right click on the slot (not that tape drive) containing the media that you wish to erase.  If you are using a stand-alone drive, then you right click on the tape drive itself.

If you find this is a solution for the thread, please mark it as such.

l'image des RickAndrei

Hi larry,

Yes I'm using single stand alone tape drive HP Ultrium 6000 LTO 5.

l'image des CraigV

Hi,

What OS is this running on? If Windows Server 2003 then make sure the Removable Storage service is stopped and disabled.

Otherwise, you can try 1 of 2 things:

1. Download HP Library and Tape Tools, and with the BE services stopped, see if you can use this to erase a tape;

2. Completely uninstall the tape drive from Windows and BE, and then restart the server. Use tapeinst.exe to reinstall the drivers and try again.

Thanks!

Alternative ways to access Backup Exec Technical Support:

https://www-secure.symantec.com/connect/blogs/alte...

l'image des Mohd. Arshad

BE2012 is server centric. Check if you have ran any dependent jobs on that particular tape which might be blocking it (for example: a incremental backup)

Also check the view on the screen. Some times the list view does not let you delete whereas the tree view lets you do that (this is most commonly seen in jobs deletion)

Regards,

Mohamed.

(Please update the status)

Regards,

Mohamed Arshad Akbar

l'image des CraigV

..the OP is trying to erase a tape...not delete a job!

Thanks!

Alternative ways to access Backup Exec Technical Support:

https://www-secure.symantec.com/connect/blogs/alte...

l'image des Larry Fine

When right clicking on a stand-alone tape drive, you should get the following

If you find this is a solution for the thread, please mark it as such.

SOLUTION