Vidéos d'aide de Screencast

Help- HeartBeat Interval

Created: 23 Janv. 2013 • Updated: 24 Janv. 2013 | 6 comments
l'image des Car_Bed
Ce problème a été résolu. Voir la solution.

So,

Latest version of SEP 12.1.2015

In the Client tab, right hand side, Policies. Define your Heartbeat interval. I define one for each location, you dont need to tell a client thats outside to phone home every xxx minutes, to cut down on the chatter. So i wish to seperate out Heartbeats for inside and outside..Whenever i make a change to one, it reflects on the other...What am i missing here...Hopefully nothing obvious...

Testing out a few things and it works in 11.x for example I can set One location to have Heartbeat XX and another Location to have Heartbeat YY

Commentaires CommentairesAccéder au dernier commentaire

l'image des Brɨan

You need to break inheritance on the groups so you assign individual policies/settings.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

l'image des Car_Bed

Brian- thanks for the reply (appreciate it)

I did this initially, as this SEPM group will house MAC systems. So PI has been removed..

l'image des Brɨan

By doing this, you can change settings on one group without affecting the others.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

l'image des SebastianZ

You still can do it - under each location -> Setting for Location Internal or External go under Location specific settings -> Communication Settings: Group Pull -> and here you can set up the heartbeat for each location separately.

Thats probably the way you do it - there is only one thing missing to it:

- first click on the Communications setting (under each location) -> Tasks and deselect "Use group communications Settings" - this will allow to set each location separately

group communication.jpg
SOLUTION
l'image des Car_Bed

Thanks guys for replying.

@ Sebastian- You da man. Thats the one i was looking for,,,,

This is what happens when you live nothing but PKI for 2years...

l'image des SebastianZ

Glad to help :D I admit this option could have been placed in a more intuitiv/visible spot on the GUI.