Vidéos d'aide de Screencast

Inserting Tapes Manually

Created: 11 Juin 2013 • Updated: 12 Juin 2013 | 5 comments
Ce problème a été résolu. Voir la solution.

I'm trying to script in Perl using the command "vmupdate." Sometimes we have tapes that get ejected from a vault mixed with tapes that were going to be inserted as scratch on our Tape Library. The problem we get is if we run "vmupdate" using the flag -empty_map, it will inject all the media to the Tape Library. The reason we do this is to avoid conflict with the TLD. Is there  a command other than vmchange that would allow me to insert tapes manually? 


vmchange -res -multi_inject -w -ml media_id:media_id -verbose -rn robot_number -rt robot_type -rh server

This will take all tapes in MAP and insert them. It doesn't matter if I use the -ml flag. So the final question:

Is there a way to manually inject tapes by specifying barcodes?

Thanks in advance.

AIX 6.1 

Netbackup Master Server

Operating Systems:

Commentaires CommentairesAccéder au dernier commentaire

l'image des _tron_

I get the information of tapes in the i/o slots using the following:

echo "s i" | tldtest -r /path/to/dev | grep Barcode

l'image des Will Restore

You cannot use vmupdate to inject one or more tapes and leave others in the MAP.  You can move individual tapes with robtest  (for example: m p1 s22 ) but then you have potential conflict with slot assignment and you'd still have to run vmupdate to resync NetBackup inventory with the library.

It would so much simpler to pull all the outgoing vault tapes before inserting the scratch volumes.

Will Restore -- where there is a Will there is a way

l'image des _tron_

Thank you. I just wanted to verify. At least now I'm headed towards the right direction. 

l'image des RonCaplinger

If your library supports the feature, you might consider auto-importing tapes from the I/O door as soon as you put your tapes in and close it.

Try adding AUTO_UPDATE_ROBOT to your /usr/openv/volmgr/vm.conf file on the robot control host, and then I think you need to cycle ltid, or stop/start NetBackup services on that media server.  The robot will send a message to NBU and NBU will initiate an import on the robot automatically, it will put the tapes away, and send the new tape info back to NBU, which will update its EMM database.  Then you wouldn't have to concern yourself with tapes being left in the door when your eject process runs.

You may also need an EEB applied, as I think had a bug with this feature that prevented tpaes from auto-importing.

l'image des Will Restore

AUTO_UPDATE is a nice feature (we use it too) but it will inject all media in the MAP and not just desired scratch media.

Will Restore -- where there is a Will there is a way