Vidéos d'aide de Screencast
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

SEP 11 upgrade to SEP12.1, client is still communicating with SEPM11

Created: 07 Sept 2012 • Updated: 11 Oct. 2012 | 5 comments
Ce problème a été résolu. Voir la solution.

Hi all.

I did some upgrading from SEP 11to SEP12.1, but client is still communicating with SEPM11... I have to manually change sylink.xml....

Who know how to deal with it on SEPM12, not change its sylink,xml....

Commentaires CommentairesAccéder au dernier commentaire

l'image des Ashish-Sharma


Try to stop SEP client service

Export new syslink.xml for SEPM 12.1.


How to Deploy Symantec Endpoint Protection to your client computers using the Migration and Deployment Wizard

Thanks In Advance

Ashish Sharma

l'image des Mithun Sanghavi


In this case, you could work on the steps below:

Sylink.xml location has changed in SEP 12.1

  1. Click on Start and Click Run 
  2. Type smc -stop in the run field 
  3. Copy the sylink.xml file and paste under "C:\Documents and Settings\All Users\Application Data\Symantec\Symantec Endpoint Protection\12.1.xx.xx\Data\Config" it will prompt do you want to replace the file click on Yes. 
  4. Start the smc service 
  5. Click Start and Click Run  
  6. In the run field type the following command: smc -start 


You could use the SylinkDrop Utility. SylinkDrop is INSTALLED on the client by default.  In fact, by default, those steps won't work, because tamper protection will prevent you from touching the sylink file.

Just run Sylinkdrop from here: C:\Program Files\Symantec\Symantec Endpoint Protection\<Version>\Bin and you can replace the sylink file.


Using the "SylinkReplacer" Utility

To get the SylinkReplacer version_12.1 Utility, you will have to call symantec or log a web case.

QuickStart Guide - Create and Manage Support Cases in SymWISE

How to update a support case and upload diagnostic files with MySupport


Regional Support Telephone Numbers:

United States: 800-342-0652 (407-357-7600 from outside the United States)

Australia: 1300 365510 (+61 2 8220 7111 from outside Australia)

United Kingdom: +44 (0) 870 606 6000

Additional contact numbers:

Hope that helps!!

Mithun Sanghavi
Senior Consultant

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

l'image des .Brian

Create a new package and check the following:

Remove all previous logs and policies, and reset the client-server communication settings

This should get it communicating with 12.1 SEPM.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.