Vidéos d'aide de Screencast

SEPM re-installation on Same Hardware

Created: 21 Janv. 2013 • Updated: 23 Janv. 2013 | 16 comments
l'image des SymClient
Ce problème a été résolu. Voir la solution.

Hello All,

I need best practice for  SEPM 12.1 RU2 re-installation on same hardware,hostname and ip address.

So that existings client should having re-communication issue.

Regards,

Ajeet

Commentaires CommentairesAccéder au dernier commentaire

l'image des Ashish-Sharma

hi,

you can follow  Best Disater recovery process

Symantec Endpoint Protection 12.1: Best Practices for Disaster Recovery with the Symantec Endpoint Protection Manager
http://www.symantec.com/business/support/index?page=content&id=TECH160736

Thanks In Advance

Ashish Sharma

SOLUTION
l'image des SymClient

Thanks Ashish,

As we are not going to restore the backup from existing av server.

I need information about client re-communication. is same hostname and ip address is enough to re-communicate to new server?

regards,

Ajeet

l'image des Ashish-Sharma

Yes,

if you are follow this artical all client will be communcate recommunicate your sepm server.

Thanks In Advance

Ashish Sharma

l'image des SymClient

Ok.

I will follow same article and update here....

l'image des SymClient

As i will be not using exsiting backup. do i need to use recovery file at the time of SEPM installation.

l'image des Ashish-Sharma

hi,

Are you installing fresh SEPM ?

If yes please check this thread

https://www-secure.symantec.com/connect/forums/cle...

Thanks In Advance

Ashish Sharma

l'image des pete_4u2002

you can use the same name and IP  and without backup you should be using encryption password ( same) and domain ID while following the DR steps.

l'image des SebastianZ

Just follow the disaster recovery procedures provided above and youi should be fine - you can import the recovery file so that the communications setting from the old sepm are preserved and it will allow clients to reconnect.

l'image des Mithun Sanghavi

Hello,

For the best practice for SEPM 12.1 RU2 re-installation on same hardware, hostname and ip address, check these Articles for SEP 12.1 RU2

Symantec Endpoint Protection 12.1: Best Practices for Disaster Recovery with the Symantec Endpoint Protection Manager

http://www.symantec.com/docs/TECH160736

How to move Symantec Endpoint Protection Manager 12.1 from one machine to another

http://www.symantec.com/docs/TECH171767

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

http://www.symantec.com/business/support/index?page=content&id=TECH163700

Hope that helps!!

Mithun Sanghavi
Associate Security Architect

MIM | MCSA | MCTS | STS | SSE | SSE+ | ITIL v3

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

l'image des SymClient

Thanks to all,

provided solution worked.

l'image des Ashish-Sharma

HI,

If you received solution please don't forgot mark as solution .which comments best help you.

Thanks In Advance

Ashish Sharma

l'image des SameerU

Hi

Please follow the disaster recovery to do the same.

http://www.symantec.com/business/support/index?pag...

Regards

l'image des abhishek8866

please follow just the disaster recovery procedure and that is it what you rquire.

http://www.symantec.com/docs/TECH160736

l'image des Ambesh_444

Thank you for marking thread as a solved..

Thank& Regards,

Ambesh

"Your satisfaction is very important to us. If you find above information helpful or it has resolved your issue. Please don't forget to mark the thread as solved."