Tape backup failed
Backup server is configured to a windows server with a quatnam tape livrary with 2 drive.
Backups running to specfic to one drive, those were failing with the below error :
If the storage is tape based, this is usually caused by dirty read/write heads in the tape drive. Clean the tape drive, and then try the job again. If the problem persists, try a different tape. You may also need to check for problems with cables, termination, or other hardware issues.
If the storage is disk based, check that the storage subsystem is functioning properly. Review any system logs or vendor specific logs associated with the storage to help determine the source of the problem. You may also want to check any vendor specific documentation for troubleshooting recommendations.
Final error category: Backup Media Errors
So I have clean the drive and then after 1 backup went fine and again it satrted failing. I also checked whether it is taking same tape.. No it is not taking same tape.
Can you please help for getting a solution for this,