Video Screencast Help

Network Access Control

Results for Network Access Control

Is there a section on this site (or any site for that matter) that lists the ideas in terms of Symantecs priority. I understand that there is a section for in developement. But I think many of the people who enter ideas here want to know how/when their ...
Idea by timaa | 15 Sep 2009 | 1 comment
The Symantec ThreatCon rating is a measurement of the global threat exposure, delivered as part of Symantec DeepSight Threat Management System. We always see the ...
Blog Entry by Aniket Amdekar | 14 Sep 2009 | 0 comments
Prelude Initially, I wrote this about Backup Exec, because that's where I ran into this problem. I'm also a SAV & SEP veteran but don't recall seeing this heinous language in their KB articles. So maybe it's a Veritas thing. ...
Idea by JRV | 13 Sep 2009 | 20 comments
Hello all, Before we start, as a heads up, this article covers a specific MAB solution only and you're assumed to know how to setup a 802.1x authentication environment with SNAC and Cisco switches. Basics of 802.1x installation is not the ...
Article by Bekir | 12 Sep 2009 | 7 comments
The customer is using Gateway Enforcer in 1GB network as inside and 100MB network as outside. TCP/IP buffer size of SNAC  is not changed from console. So they request to add the way to tune them to avoid packet loss. (Security, Network Access ...
Idea by kkitajima | 08 Sep 2009 | 0 comments
By default, NIC cannot select the negotiation and it sets auto-negotiation on SNAC Enforcer Appliance. Some customer request to fix the negotiation to avoid the packet loss. (Security, Network Access Control, Configuring) () By default, ...
Idea by kkitajima | 08 Sep 2009 | 0 comments
What all can you do with Symantec Network Access Control? With Symantec Network Access Control you can verify system configuration and status. Symantec Network Access Control provides Real-time policy compliance on host systems. Access to the ...
Article by Vikram Kumar-SA... | 01 Sep 2009 | 20 comments
I need a solution after install sep , why we should use sep(snac) to connect sepm through 802.1x uncontrolled port? if we dont connect sepm ,we cannt access network through 802.1x ...
Forum Discussion by daodaoer | 31 Aug 2009 | 1 comment
Our current SNAC approach is 1. Check HI pass or not 2. If fail, do remediation 1st 3. If remediation fails, then quarantine client. My customer is thinking following approach is best 1. Check HI pass or not 2. If fail, quarantine ...
Idea by stakimoto | 27 Aug 2009 | 0 comments
If we enable "Display a notification message when a Host Integrity check fails" , a notification dialog will appear when HI fails on client machine. But this notification dialog will dissappear after 30 sec automatically or press ...
Idea by stakimoto | 26 Aug 2009 | 1 comment