“Recently I try to build up the SNAC. However, after enbling the SNAC, it is impossible for my computer to access to internet. dc: 192.168.0.1 NPS(Windows Radius Server): 192.168.0.1 My lan-enforcer ip : 192.168.0.12 Cisco SW command: radius-server host 192.168.0.12 auth-port 1812 acct-port 1813 key...”

“Today I am busy with configuring the Lan-Enforcer. Communication methods and port i used are as below, http 801414 However, it is impossible for me to set 801414. The range is between 1 and 65535. could some one tell me which number we use? ...”

“I have entered a few MAC addresses in the SNAC Appliance using the MAB DATABASE ADD command. Now i need to find out which are the MAC addresses i have already added in the database of the appliance. I know we can go to the LINUX mode of the SNAC Appliance. But once in the LINUX mode,...”

“Hi, I have purchased SNAC Essentials and based on the data sheet I thought I could build my own LAN enforcer using RedHat rather than buy a hardware appliance. I had put aside a couple of HP DL360s for this purpose. ...”

“Hi, Can some one hlep me where I can get Symantec Gateway Enforcer and Lan Enforcer diagrams. Regards, Rajesh. ...”

“Greetings: Would like to utilize a 3rd party bilateral authetnication solution to identity user before they enter certain network segments.  If the segments are protected with SNAC, can SNAC be configured to utilize a SAML assertion for authentiction?? The workflow would be: ...”

“Hello, I came across a customer who mentioned that he was getting limited bandwidth after installing SEP 11.0.5 and mentioned that he was also using BEWS 12.5. Informed the customer to remove the network threat protection and reboot. The things seem to work fine once the Network threat protection...”

“Hello Friends, ...”

“Hello all, I've a few questions. Any response is appreciated. 1. Do we have any release notes for NAC and ODC agents and also for Enforcer images? 2. What is the situation for ODC and Windows 7 compatibility? 3. Is it possible to do a Host authentication using and ODC client, without using...”