RapiDeploy TEXT 6.8 (8397) (win32-x86-release)
Copyright <C> 1996-2007 Altiris, Inc. All rights reserved.

-align:X                Set partition alignment: X={cyl|track}
-bsl:N                  Set broadcast speed limit to N MBits/sec
-cmdline                Show the command line parameters in text mode
-cfgfile:{NAME}         Set the configuration filename (default is lastrun.cfg)
-checkdisk              (The functionality of this switch has been disabled.)
-cX                     Set compression type: X={off|size|balanced|speed}
-dpos{1-2}              Specify the desired disk position if a disk will be removed after imaging
-dsconfig:{NAME}        Specify the DS config file to be copied after restoring an image
-dsstatus:{N.N.N.N:P}   Specify the ip and port to use for communication with DS
-dN[,N...][:N[,N...]    Specify the disks to process (e.g., -d1 or -d1:2 (disk 1 to disk 2) or -d1,2 (RAID on disks 1 and 2)
-forceoem               Force the OEM partition to be restored even if it exists on the destination
-forcebf                Force boot fixup in cases where it does not normally occur
-forcebw                Force the BW partition to be restored even if it exists on the destination
-frm:{NAME}             Specify files to be copied to the boot volume after restoring an image
-f{NAME}                Specify the image name
-grubdir:{DIR}          Specify the directory where the GRUB boot files are located
-h                      Show command line help
-help                   Show command line help
-?                      Show command line help
-ip:{N.N.N.N:P}         Set the multicast ip address and port.
-iosize:N               Set the size (in KBytes) of reads and writes to the image file (4-64k)
-i{ID}                  Set the multicast session ID
-kap                    Keep all existing partitions during download
-kprs                   Keep the existing recovery partition during download
-kp{1-31}               Keep an existing partition during download
-logo:{NAME}            Specify a path to a progress dialog logo bitmap (PCX in dos, BMP in windows)
-makeimx                Create an image index file (.imx) to reduce media swapping
-mcastspeed:{speed}     Set multicast speed.  Range: 1 or greater.  1 = DS 6.5 and previous speed, 5 = DS 6.8 default.
-mcint:{N.N.N.N}        Specify the interface for multicasting. (can be DEFAULT)
-mclient                Operate in client mode
-mconv                  Convert .img to .exe
-mdb                    Download and multicast an image
-mdd                    Copy one disk to another disk
-mig:{NAME}             Specify migration file. Prompts before overwriting the disk
-mmm                    Operate in multicast master mode
-mub                    Upload and multicast an image
-mb                     Multicast only
-md                     Download (restore) an image
-mu                     Upload (create) an image
-nospacecheck           Don't check for available space on the volume where the image is being created
-noprompt               Prevent any need for user interaction, e.g. hitting <OK> after an error occurs
-nocancel               Don't allow the user to cancel the imaging task
-nooem                  Make the destination end up with no OEM partition
-nors                   Make the destination end up with no RS partition
-nobw                   Make the destination end up with no BW partition
-nt64k                  Force FAT16 to use 64k clusters (NT systems only)
-n                      Process the sources but not the destinations (null destination)
-postconfig             Do post configuration from within rdeploy
-password:{PWD}         Specify the image password
-poem                   Image the oem partition unless it already exists (see -forceoem)
-prs                    Image the recovery partition
-pb                     Image the bootwork partition unless it already exists (see -forcebw)
-p{1-31}                Select the partitions to process (can be repeated, e.g.
-p1 -p2, etc.)
-raid:N                 Specify the software RAID level
-raw                    Treat all partitions as raw
-raw:{1-31}             Treat the specified partition as raw
-rescan                 Tell the OS to reread the partition table after imaging
-restorebt              Restore the boot track during download
-restoresig             Restore the MBR disk signature during download
-rscs:{NAME}            Make a recovery solution checksum file during upload
-splash:{NAME}          Specify a path to a splash screen bitmap (PCX in dos, BMP in windows)
-split:N                Split the image at N megabytes during upload
-span                   Prompt for media between image segments (use with -split)
-szX[:Y]                Resize partitions: -sze, -szf, -szX:e, -szX:eY, -szX:f,
-szX:Nm, -szX:Np (X,Y=slot, e=existing, f=fixed, m=MBytes, p=percentage)
-sN                     Send to N clients
-threshold:N            Set the minimum number of clients needed to multicast
-throttle:N             Throttle rdeploy operations to N mbps
-ver                    Display version information and exit
-wN                     Set the timeout (in minutes) for autonegotiation and client connecting