Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.
Backup and Recovery Community Blog
Showing posts tagged with 12.x
Showing posts in English
Angelique28 | 03 Jan 2011 | 0 comments

For those how would like to try Windows Server 2008 R2 Foundation  Operation System with Backup Exec Windows licenses, this might be information. :D

     Windows Server 2008 R2 Foundation is a new server OS from Windows. This is “smaller” (less functionalities) than a Small Business Server.

     This Operative System includes a Windows File Server and Active Directory. Customers with this type of servers who would like to have backup copies would need to have a BE for Windows Standard as core license. Small Business Server key will NOT WORK, in Windows Server 2008 R2 Foundation.

    For customers with the wrong product, they may need to contact their direct reseller to request for exchanging product. However, make sure to check the purchased date. You may return or exchange it within 45 days only. Else, it would be the reseller's choise if they will let you...

Dev T | 15 Dec 2010 | 0 comments

To understand the Types/Methods of Backup we must dive into the attributes of a file.

There are 4 basic attributes of a file which are known as DOS attributes:

READ, HIDDEN, SYSTEM and ARCHIVE

Whenever we think of Backups we must only think of the ARCHIVE attribute. 

Thumb Rule: Whenever the ARCHIVE attribute is ON (1) the file is ready for backup and whenever the ARCHIVE attribute is OFF (0) the file has been backed up.

There are 5 types of backups:

1.    Normal/Full Backup: This backup method will backup the entire selection list irrespective of the ARCHIVE BIT, but after the backup is over it will RESET the ARCHIVE bit to 0 (Change it to 0 : Meaning the file(s) has been backed up)

2.    Incremental Backup: This backup method will only backup those files on which the ARCHIVE...

Marky09 | 10 Dec 2010 | 1 comment

If you do not have any Licensing portal account, follow the quick steps below:

  1. CREATE ACCOUNT
    1. Navigate to https://licensing.symantec.com
    2. Click Create Account
    3. Enter the required details
    4. Click Create Account
    5. Accept the Symantec User agreement
    6. You will receive a confirmation page for the creation of your License Portal account
    7. Click on the Licensing Portal Home Page” button at the bottom of the screen
  2. REGISTER LICENSE
    1. Click on New Purchase
    2. Enter the following serial number: xxxxx
    3. Click Submit
    4. If you have more serial numbers for the same product, please enter them in the "Add another license for this product" field and click "add"
    5. Click Next
    6. In the following page, please verify and enter information related to your license registration
    7. Click "...
pkh | 03 Dec 2010 | 6 comments

The only reason I can think of for using partitions in a tape library is to force BE to write to a particular tape or to a particular set of tapes.  This is a desirable outcome for some organizations.  However, this comes at a price.  When more tapes are needed and there is none in the targeted partition, BE will not be able to get the tapes from another partition even if they are available and the job will fail.  Backup job failures are bad for the organization.  The reasons why this is so are covered in the second paragraph of my article

 https://www-secure.symantec.com/connect/articles/must-mondays-backup-be-monday-tape

If the library is not partitioned, then BE can get a tape from another media set and complete the job.

BE will only take a tape from another media set if there are insufficient tapes in the targeted media set. ...

pkh | 30 Nov 2010 | 0 comments

When your backup job failed with an error message, "Unable to connect to resource .....", you should expand the job log by clicking on the Expand All button and examining each of the resource that was backed up.  Do not rely on the resource given in the "unable to connect" message.

My BE media server is also my Lotus Domino server.  A couple of weeks ago, my job failed with "Unable to connect to resource C: drive".  This message makes no sense because the C: drive on my media server can definitely be accessed.  Otherwise, BE will not be able to run.  I ran a test to backup the C: drive and it did not fail, but the following night's backup again failed when it is unable to connect to the C: drive.  It took a couple of failure before I expanded the joblogs and saw that the C: drive backed up fine, but the Lotus Domino databases were not being backed up.  I realised that the jobs were unable to connect to...

pkh | 30 Nov 2010 | 2 comments

BE comes with a commandline line applet called BEMCMD.  This program is located in the BE installation directory, along with it manual.  One of the BEMCMD can be used to start jobs which were already created.  For example,

"C:\Program Files\Symantec\Backup Exec\bemcmd.exe" -o1 -j"Backup SQL Logs"

Backup SQL Logs is a job that has been submitted as Run Now and On Hold.  The full path is used above because the BE installation directory is not in the default path in Windows.

You can schedule BEMCMD to run at a particular time using the Windows scheduler or as a pre- or post- command in a BE job.

In the example above, when the backup job ends, Backup SQL Logs will be started.  In this way, you can chain jobs together.

You can also run BEMCMD from any Windows machine...

pkh | 21 Nov 2010 | 0 comments

If you are using policies to create your jobs, are you aware that you can edit the job properties of job that is scheduled to run next?  Here is what editing the next run will do

I use this feature a lot to edit my pre- and post- commands.  Sometimes, I want them to skip a run.  I will delete them from the job properities of the next run and I don't have to worry about re-instating them for subsequent runs.  The edit next run feature also works great for temporarily changing the target media set.

This is easier than editing the policy to make the change.  If you change the policy, you got to edit the policy again after the next run to reverse the change .

To edit the next run, right-click on the scheduled policy job in the Job Monitor tab and select Edit Next Run.

pkh | 19 Nov 2010 | 0 comments

Q.  I know I did the backup, but the data is not displayed when I try to restore it.

A. You got to ensure that the Beginning Backup Date and Ending Backup data are set wide enough.  See the diagram below

 

This is applicable to situation whether the backup is an old one or the server date is wrong.

pkh | 18 Nov 2010 | 0 comments

Q. Can I delete an item from a backup?

A. No.  It is not possible to delete an item from a backup.  The only way is to restore the entire backup, delete the item and then backing up the rest of the data again.

pkh | 18 Nov 2010 | 0 comments

Q. Why does BE use new .bkf files, rather than overwriting old ones?

A. Go to Tools --> Options ---> Media Management and check that the following is set

 

If you set it to overwrite recycleable media, then it will not create any new .bkf files if there is a .bkf in the B2D folder that can be overwritten.

Setting this option to overwrite scratch media (1st option) can cause BE to create more and more .bkf until the disk is full.