Video Screencast Help

Endpoint Management Community Blog

Showing posts tagged with Workflow Solution
Showing posts in English
SymantecWorkflowTeam | 13 Aug 2012 | 0 comments

The release of Workflow 7.5 revolutionizes the concept of community-based documentation by creating component wiki pages for every component included in Workflow. This new component wiki model makes structured, community-based content available at its point of use.

You can access these component pages in the articles section of the Endpoint Management Community. You can also access these component pages from within Workflow Designer that shipped with ServiceDesk 7.5. Once Workflow 7.5 is released, you can access the component pages from within the Workflow Designer.

As a member of the Workflow community, you can earn Symantec Connect points and help others in the Workflow community by adding your knowledge, use cases, and examples to the wiki pages for the components that you use

Symantec will continually add content to these pages. However, we encourage you to submit ideas, use cases, and suggestions to help develop the community based articles.

We hope...

Jason Short | 03 Jul 2012 | 6 comments

As an innovation leader, Symantec has broken new ground again, this time in developer documentation. After an in-depth review of documentation for development frameworks similar to Workflow, we found that the best available documentation is community based. Unfortunately, community-based documentation tends to be both unstructured and difficult to find.  

For the upcoming release of Workflow 7.5, we have revolutionized the concept of community-based documentation by creating component wiki pages for every component included in Workflow. These wiki pages are available inside the Workflow Designer, where Workflow developers need to find it, as part of each component’s Online Help. This new component wiki model makes structured, community-based content available at its point of use.  

As a member of the Workflow community, you can earn Symantec Connect points by adding your knowledge, use cases, and examples to the wiki pages for the...

SK | 20 Mar 2014 | 1 comment

Hello all,

I have attached three English EULA's pertaining to Altiris Product's as it appears that the EULA's are not easily found.

 

The EULA associated with the SIM install itself.

The EULA for ITMS 7.5

The EULA for the 9 hotfixes that are available after installing ITMS 7.5

 

I hope that this blog is continuously updated by the community adding either new English EULA's or the existing EULA's in non-English languages.

SK | 20 Mar 2014 | 0 comments

Hello all,

Today I ran into the above mentioned problem whilst trying to perform a clean install of ITMS 7.5, so I thought I would share what worked and what didn't.

Windows 2008 SP1 R2 with SQL 2012 SP1.

SQL was initially configured for Windows Authentication.  When SIM failed, I manually created the database to no avail.

I then changed to mixed authentication and changed the SA account (as I obviously didn't know what the original one was) via the UI.  Unfortuantely, the SA account had the same problem.

 

What worked was running the following query:

USE master
GO
ALTER LOGIN [sa] WITH PASSWORD=N'NewSAPassword', CHECK_POLICY = OFF
GO
ALTER LOGIN [sa] ENABLE
GO

 

This allowed SIM to create the database and begin the installation phase.  Once ITMS 7.5 was installed, and the 9 hotfixes (required a rebot beforehand), I opened the Database Settings page and...

artrathke | 11 Mar 2014 | 1 comment

This is a job description for an Altiris Administrator.

africo | 06 Mar 2014 | 3 comments

Workflow (including ServiceDesk) collaboration and learning effort.

BRING | 29 Oct 2013 | 0 comments

Recently, it was observed that when using Servicedesk, clicking on the lightning bolt to edit a user caused the error below to appear:

System.IO.FileLoadException: The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

The full text of the error 

Error,Friday, October 25, 2013 7:20:24 PM,[global] Application 'LogicBase.Ensemble' error

[global] Client Host Information:

[global] IP: xxx.xxx.xxx.xxx

[global] HostName: xxx.xxx.xxx.xxx

[global] Browser: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.2; MS-RTC LM 8; .NET4.0E)

[global] -- error.ToString() --

[global] System.Web.HttpUnhandledException: Exception of type 'System.Web....

Ludovic Ferre | 07 Oct 2013 | 3 comments

The symantec.pl.xml update for 7.5 has hit SolutionSam.com, so 7.5 is now GA.

Here are some information from the product listing:

file md5  = b8675ec97437e633fbcad1c112a6a557
file size = 15 361 694 bytes
timestamp = 2013-10-03 10:59

And here its the full file list (and handfull as you could guess :D):

Modified:
/solutions/7_5/eipower/7_2_rtm/ei_powersaversolution_7_2_perth.msi
 
Added:
/solutions/7_1/ita/ita_doc/altiris_itanalyticsdocumentation_x64.msi
/solutions/7_5/itms/7_5_rtm/altiris_activitycenter_7_5_x64.msi
/solutions/7_5/itms/7_5_rtm/altiris_activitycenterlanguages_7_5_x64.msi
/solutions/7_5/itms/7_5_rtm/altiris_agentlessinventoryupgrade_7_5_x64.msi
/solutions/7_5/itms/7_5_rtm/altiris_agentlessinventoryupgrade_7_5_x86.msi
/solutions/7_5/itms/7_5_rtm/altiris_assetmanagementcombine_7_5_x64.msi
/solutions/7_5/itms/7_5_rtm/altiris_assetupgrade_7_5_x64.msi
/solutions/7_5/itms/7_5_rtm/...
BRING | 22 Aug 2013 | 0 comments

A new issue was discovered, such that, when using a Windows 7 client computer, using running IE9, when attempting to access an HTTPS-configured ServiceDesk 7.5 MP1 server, the client computer won't perform Active Directory passthrough authentication.  Using Google Chrome version 28 on the same Windows 7 client system works correctly, and IE9 on XP client system works.

 On the Windows 7 client system, when accessing the URL - https://<servername>/processmanager/windowsauthent..., while using IE9,  and then call https://<servername>/processmanager/, the passthrough authentication then works as expected.  Also, if IIS is configured  to not...