Video Screencast Help
Endpoint Virtualization Community Blog
Showing posts tagged with Performance
Showing posts in English
Pablo Yabo | 18 Mar 2013 | 2 comments

At Nektra we have done a performance comparison of Virtualizing IE6 on W7 in VMWare ThinApp and Symantec Workspace Virtualization. 

You can read the full article in our blog: Benchmarking IE6 Virtualization: VMWare ThinApp vs. Symantec Workspace

We use SpyStudio to compare ThinApp and Workspace Virtualization performance. Both Symantec and VMWare highlight the use of application virtualization to run legacy web applications. There is a huge number of mission critical web applications that only run correctly on Internet Explorer 6 and while companies may be able to afford the cost of migrating applications to modern browsers, they cannot afford even a short...

doug_coombs | 02 Jan 2010 | 0 comments

Dear Valued Symantec Workspace Customer:

PLEASE READ THIS MESSAGE CAREFULLY.

This message contains critical, time-sensitive information for any Symantec Workspace Streaming 6.1 Free Demonstration user who has installed the product's Virtualization agent using the Workspace Streaming 6.1 Common Installer found on the public download site for trial.

Who Does this Message Apply To?

The instructions below only apply if you have used Symantec Workspace Streaming 6.1 Common Installer to install the Workspace Virtualization agent, in which case please read this entire message and the instructions carefully. This does not apply to you if you have used any other mechanism to install the Workspace Virtualization agent.

What has Occurred?

In order to better meet the needs of our Symantec Workspace customers, Symantec has been working towards eliminating the requirement for these customers to enter their license key to activate their...

erikw | 02 Sep 2009 | 0 comments

After a very cool demo at VMworld VirtualStorm shocked the VM people.

Running over 450 VM's on each host and still having a very great response. Actually these 450 VM's could be used by users without seeing any latency or experiencing unresponsiveness. The images run a small script that generates some load. It simulates end users and preforms some tasks.

With the Cisco USc and the EMc next gen storage we are really doing some cool demos.

VMware told us that we would not be able to go over the border of 320 images on each host, but we reach 450 without any problem.

Thursday on the last day we are going to stress the environment to see how far we can go.

Can we go over the border of 512 on each host?
Can we go over 3000 managed VM's in VirtualCenter?
How will the hardware do?

If you are at VMworld, take a look at it.
We start at 2 PM.

If you're not there? Then keep on my blog. We will record it and put it on Symantec....

AndyN | 14 Aug 2009 | 0 comments

Attention all Altiris User Group members and fans of the Symantec ManageThis band located anywhere near Cleveland, OH!

We are holding a HUGE regional User Group meeting on Friday, October 2 in conjunction with the finals of the 2009 Corporate Battle of the Bands . Key members of the Altiris Product Management team will be presenting several technical sessions and answering your questions. Come prepared to learn, network, and have a great time!

Here's the schedule and links to register (you must RSVP for each event you want to attend)

  • Thursday, October 1 at 6:30 pm: REGISTER 
    BBQ feast, drinks and entertainment at our private party at the Rock and Roll Hall of Fame
     
  • Friday, October 2, 8:00 am to 4:30 pm: ...
riva11 | 27 Jul 2009 | 0 comments

VMWare has released an interesting 54 pages ebook “Performance Best Practices for VMware vSphere 4.0” about the principal guidelines to optimize the performance of VMware vSphere 4.0 , this book is available for a free download from VMware site.

Link : http://www.vmware.com/resources/techresources/10041
 

riva11 | 18 Feb 2009 | 4 comments

My goal is to create a USB memory key to use in case of emergency. Recovery computer from virus, hard disk crash, Bsod, or other issue, where the only solution is a manual operation. Many times I had to find the right software utility to complete my USB Swiss Army Knife.

Prerequisite to create a complete software collection to use on USB memory key is the portability and possible the freeware license.

Somewhere on the internet, I found several utilities, for example I have described some of these in my previous posts on Juice.

See these posts:

CV | 09 Dec 2008 | 0 comments

Create a single layer for Adobe CS3 through Windows command prompt by doing the following.

Open SVS Admin Console. Click on File > Create New Layer > Install Application > Give Layer Name > Single Program Capture and browse to C:\Windows\System32\cmd.exe. This will launch Windows Command Processor.

When the Windows Command Processor window opens, SVS will start capture mode. At that point either drag and drop setup.exe file for Adobe CS3 into the Windows command processor or browse from within CMD window to the location of setup.exe for CS3 and start the installation process. Choose which applications from CS3 you want to install.

Once the installation process for Adobe CS3 is done, click Finish.

Important: Do not close the Windows Command Processor window.

Go to Start > All...

riva11 | 06 Nov 2008 | 2 comments

For all IT Admins interested in Sysinternals tool, there is an alternative to download individually each tool. The Sysinternals Suite is also available on Technet.

One ZIP file that contains all Sysinternals programs with only few exceptions (like BSOD screen or NotMyFault tools.)

The Sysinternals Suite can be found at: Sysinternals Suite.

This page also lists all utilities with detailed usage and helpful examples.

FrankB | 24 Jul 2008 | 3 comments

V2.5.0.0
New: Major Gui Redesign
Fix: Rename layer
New: Layer Tooltips

How Does it work:

When starting it checks if you're a Administrative user and allows the program.
It also checks if you're an Corporate user, and will switch off some options.
It'll check if you are using Altiris Virtual Software Solution V2.1.2083 or higher, lower and it will tell you to update with the possibility to click on a Link towards the download at Altiris.

Here Goes:

Activate Layer
Deactivate layer
Reset Layer
Rename Layer...

FrankB | 28 May 2008 | 15 comments

Do you have a Virtual Application you want to share with your friends or colleagues? But you're not sure if any private information is given to them also?

Don't you want to distibute your layers to your environment in a clean state?

Make them smaller to ensure lower bandwidth usage?

Did you just Capture a new Virtual Application, and you want a clean export?

Here's your solution!

With (Portable) Slim Layer Exporter you can export your Layers in a clean and small state. Your userdata (Registry/Disk) won't be included in the Exported Layer.

Download it here.

P.S. U3 Version is also available.

Version v1.1
Added: Extensive exporting error reporting.