Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.
Storage & Clustering Community Blog
Showing posts tagged with Windows
Showing posts in English
SAMG Tech Support Team | 18 May 2010 | 0 comments

Release Type:  Device Driver Installer (DDI) Release’s

Storage Foundation for Windows 5.1SP1
Storage Foundation HA for Windows 5.1SP1

OS Versions:  
Windows 2003 Server SP2, Windows 2008 Server, and Windows 2008 R2 Server (x86, x64)

General Availability Date:  May 17, 2010

New Additions for DDI-1 Package for Storage Foundation for Windows 5.1SP1
In addition to the arrays that were supported with earlier releases also provides the following enhancements:

  • DMP DSM Support (VCOMPLNT) for the COMPELLENT Vol array
  • Add the support for SUN 6180 in VENGAP DSM
  • Add the support for a new vendor "HS" in VHUAWEIAP DSM
  • Add the support for HUAWEI S6800E and HS S6800E
  • Modified the following Veritas DMP DSMs to updated version 5.1.11000.0:
  • ...
Zahid.Haseeb | 07 Aug 2009 | 0 comments

Today i will discuss an error which i faced with SFHA5.0 while deporting and importing the Disk Group.

i am using MS windows 2003(64bit) Data Centre Edition with SFHA 5.0. i faced this problem after upgrading latest firmware on SAN

when i tried to import the cluster Disk Group i was facing this error

(V-76-58645-585: Failed to reserve a majority of disks in cluster dynamic disk group)

Tried Resolution#1
i also used the vxclus.exe ENABLE -gDISKGROUP-1 -p as per this document ( but the cluster DiskGroup is not being import and getting the below message when i ran the command

V-77-57616-50002: WARNING: Make sure that a majority of the disk group disks are
online on any...

Zahid.Haseeb | 14 Jul 2009 | 5 comments

Today i would like to share my one experience why my Disk Group in which physically connected drive was not able to import after restart. i have also written a blog in which i was share that my ISCSI SAN drive was not able to import auto after restart. if you want to read that blog see the below link )

when I restart the PC the physically connected drive's Disk Group is not being able to import automatically. I had to import it after restart the PC.

i have windows 2003 server R2 with SF 5.0 installed. Two drives attached with the windows 2003 server PC. One is the boot disk drive and the second is add in the disk group named DiskGroup123.

when i restart my windows 2003 PC my disk group name DiskGroup123 is not...

nicole_kim | 18 Jun 2009 | 2 comments

Check out DCIG lead analyst Jerome Wendt's new series of blog posts talking about Veritas Storage Foundation for Windows and Server Virtualization.

Part 1: Veritas Storage Foundation for Windows Looks to make Server Virtualization a Two-Horse Race
"Part 1 of this three part series examines how file based server virtualization operating systems have failed to address high availability and performance requirements of certain applications and how Symantec Storage Foundation for Windows is addressing that in Microsoft Windows Hyper-V."

Part 2: Veritas Storage Foundation for Windows Achieves Path and Storage Management Breakthroughs in Server Virtualization
"Part 2 of this three part series examines how moving...

Douglas_A | 06 Mar 2009 | 0 comments

This document is not listed on the IBM web site so i have attached it here (hope the mods will let it stay)

It details the LTO drive status codes and there true meaning. We all have seen the Media errors from Netbackup, backupexec, and so forth. This document details what you see from the web gui of a 3500 series tape library or maybe you have another gui accessing this information. Either way i hope you get some good use out of it. I know i have.